Eberspächer EasyStart Select Operating Instructions Manual - page 14
14 | VehiCLe heATeRs – TeChniCAL DOCuMenTATiOn
pOssiBle displays in the eVent Of a fault
DispLAy
DesCRipTiOn
ReMeDy / CusTOMeR
Automatic detection is active.
The easystart select has been
disconnected from the power
supply and then reconnected.
Wait until the automatic detection
has finished.
Fault heater.
easystart select fault.
Visit your vehicle workshop.
note:
Display OFF with LOngpRess on
button.
heater OFF – undervoltage
applied.
Charge the battery.
Visit your vehicle workshop.
note:
Display OFF with LOngpRess on
button.
no communication
Check and if necessary renew the
heater fuse.
Visit your vehicle workshop.
Temperature sensor interruption. Visit your vehicle workshop.
4 WhAT TO DO iF …?
Visit www.butlertechnik.com for more technical information and downloads.
www.butlertechnik.com