Eberspächer EasyStart Select Operating Instructions Manual - page 11
VehiCLe heATeRs – TeChniCAL DOCuMenTATiOn | 11
3 OpeRATiOn AnD seTTing/ADjusTMenT
set temperature setpOint during
heating mOde – fOr air heaters Only
use the
or
button to set the tem-
perature setpoint.
temperature setpoint setting range:
8 °C – 36 °C in 1 °C increments,
46 °F – 97 °F in 1 °F increments.
please nOte!
The changed temperature setpoint is offered
again the next time the system is started.
heating Off with shOrtpress
The heATing menu item appears in the
display.
press the
shORTpRess button for less
than 2 seconds.
heATeR OFF
sTART DispLAy FOR WATeR heATeRs
sTART DispLAy FOR AiR heATeRs
Temperature inside the
vehicle
please nOte!
if the vehicle lighting is On the start display is
shown continuously.
if the vehicle lighting is OFF the display goes
out after 10 seconds.
Visit www.butlertechnik.com for more technical information and downloads.
www.butlertechnik.com