Eberspracher Airtronic D2 Installation Manual - Introduction
Introduction
4
1
Special text structure, presentation and
picture symbols
This manual uses special text structures and picture
symbols to emphasise different contents. Please refer to
the examples below for the corresponding meanings and
associated actions.
Special structure and presentations
A dot (•) indicates a list which is started by a heading. If
an indented dash (–) follows a dot, this list is subordinate
to the dot.
Picture symbols
§
Regulation!
This picture symbol with the remark “Regulation” refers
to a statutory regulation. Failure to comply with this
regulation results in expiry of the type of permit for the
heater and preclusion of any Guarantee and liability
claims on Eberspächer Climate Control Systems GmbH
& Co. KG and its associated companies.
!
Danger!
This picture symbol with the remark “Danger!” refers
to the risk of a fatal danger to life and limb. Failure to
comply with these instructions can result in severe
injuries under certain circumstances.
!
Caution!
This picture symbol with the remark “Caution!” refers to
a dangerous situation for a person and/or the product.
Failure to comply with these instructions can result in
injury to people and/or damage to machinery.
Please Note!
These remarks contain application recommendations
and useful tips for installation of the heater.
Important information before starting work
Range of application of the heater
The air heater operating independently of an engine
is intended for installation in the following vehicles,
depending on its heating output:
• Vehicles of all kinds (max 9 seats)
• Construction machinery
• Agricultural machinery
• Boats, ships and yachts (only diesel heaters)
• Camper vans
Please Note!
• The camper heaters are intended for installation in
camper vans. Version D3-Camper should be used in
situations requiring reduced noise levels.
• The heaters (only diesel heaters, 24 volt) can
be installed in vehicles used for the transport of
dangerous goods as per ADR / ADR99.
• The current controller is to be replaced by a special
controller when the heater is to be used to heat the
freight compartment / cargo (order no. see heater
price list or spare parts list).
Purpose of the heater
(using the vehicle heat exchanger)
• Pre-heating, de-misting windows
• Heating and keeping the following warm:
– Driver and working cabs, Ship’s cabins
– Freight compartments
– Passenger and crew compartments
– Vehicle engines and units
– Camper vans
On account of its functional purpose, the heater is not
permitted for the following applications:
• Long-term continuous operation, e.g. for preheating
and heating of:
– Residential rooms
– Garages
– Work huts, weekend homes and hunting huts
– Houseboats, etc.
• Heating or drying
– Living creatures (people or animals) by blowing
hot air directly at the subject
– Objects
– Blowing hot air into containers
!
Caution!
Safety instructions for application and proper
purpose!
• The heater must only be used and operated for the
range of application stated by the manufacturer in
compliance with the “Operating instructions” included
with every heater.