Eberspracher Airtronic D2 Installation Manual - Introduction
Introduction
6
1
Statutory regulations
§
Regulation!
Mounting the heater in a vehicle for the transport of
dangerous goods as per ADR / ADR99!
• When the heater is to be installed in vehicles for the
transport of dangerous goods, the regulations of
ADR / ADR99 must also be observed.
Please Note!
• Compliance with the statutory regulations and safety
instructions is prerequisite for guarantee and liability
claims.
Failure to comply with the statutory regulations and
safety instructions and incorrect repairs even when
using original spare parts make the guarantee null
and void and preclude any liability for Eberspächer
Climate Control Systems GmbH & Co. KG and its
associated companies.
• Detailed information about the regulations of
ADR / ADR99 are contained in the information leaflet
no. 25 2161 95 15 80.
• Subsequent installation of this heater must comply
with these installation instructions.
• The statutory regulations are binding and must also
be observed in countries which do not have any
special regulations.
• When the heater is to be installed in vehicles not
subject to the German Ordinance for the Registration
of Motor Vehicles (StVZO), for example ships, the
specially valid regulations and installation instructions
for these special applications must be observed.
• Installation of the heater in special vehicles must
comply with the regulations applying to such vehicles.
• Other installation requirements are contained in the
corresponding sections of this manual.
Safety instructions for installation and
operation
!
Danger!
Risk of injury, fire and poisoning!
• The heater must only be started up when the
maintenance flap is closed and the outlet hood is
mounted in position.
• The maintenance flap must not be opened during
operation.
• Disconnect the vehicle battery before commencing
any kind of work.
• Before working on the heater, switch the heater off
and let all hot parts cool down.
• The heater must not be operated in closed rooms,
e.g. in the garage or in a multi-storey car park.
• Adjustable hot air outlets must always be adjusted
so that they cannot blow hot air directly at living
creatures (people, animals) or objects sensitive to
temperature (loose and/or fastened).
!
Caution!
Safety instructions for installation and operation!
• The year of initial commissioning must be marked on
the nameplate.
• The heat exchanger of air heaters is a component
subject to high thermal loads which must be replaced
10 years after initial commissioning of the heater.
In addition, the installation date must be entered
on the plate “original spare part” enclosed with the
heat exchanger must. Then affix the plate next to the
nameplate on the heater.
• The heater must only be installed either by an
authorised Eberspächer partner or by an individual
who has been authorised by them. Failure on the
installers part to follow the installation instructions
and any special advice contained therein will lead
to all liability being refused by Eberspächer Climate
Control Systems GmbH & Co. KG and its associated
companies.
• Only the control elements approved by Eberspächer
must be used to operate the heater. The use of other
control elements can cause malfunctions.