EDAN SE-1515 User Manual - page 51
SE-1515 PC ECG User Manual ECG Sampling
- 44 -
all analysis screens.
If OFF is selected, the system does not generate any automatic diagnosis results
after the sampling is complete.
Enter the
analysis screen
when sampling
finishes
If this function is selected, the system automatically switches to the analysis
screen after the sampling is complete.
Auto print
when sampling
finishes
If this function is selected, the system automatically prints the report after the
sampling is complete.
4.4.1.5 Print Setup
Click on Setting on the resting ECG sampling screen, and the System Setting window will be
displayed. In the System Setting window, click Print Setting to enter the Print Setting window.
Item
Description
Report Setting
You can configure the information to be displayed on the print preview
screen and the report to be printed.
The options provided are: Normal ECG Report, Detailed Report,
Template Report, Rhythm Wave Report,and VCG Report.
If Template Report is selected, the Feature Point Location option will be
displayed. When Feature Point Location is selected, 5 measurement lines
will appear on the average template waveforms. However, this only applies
to the average template report for resting ECG.
VCG Report is available only when Enable Vector Calculation is
selected in the Function/Algorithm Setting window.
If VCG Report is selected, the option XYZ Wave will appear.
Current Template
Three templates are provided by default and cannot be deleted. However,
you can edit the default templates and save them as new templates.
Rhythm Lead
You can set Rhythm 1, Rhythm 2, and Rhythm 3 to any one of the leads
in the current lead mode.
Wave Width,
Grid Width
You can set grid (1mm) and grid (5mm)to 1, 2, 3, 4, 5, or No
respectively.
A larger value means that the grid printed is wider.
When No is selected, no grid will be printed.