EDAN SE-1515 User Manual - Chapter 8 System Setup
SE-1515 PC ECG User Manual System Setup
- 76 -
Chapter 8 System Setup
Click on the System Setting button on the main screen to open the System Setting window.
There are eight tabs in the System Setting window: Basic Information, Display Setting,
Transmission Setting, File Output Setting, GDT Setting, DicomWorklist Setting, Barcode Setting,
andOther Setting.
After you modify some information in the System Setting window, you can click on OK to save
these modifications and exit or click on Cancel to cancel these modifications and exit.
8.1 Basic Setup
Item
Description
Hospital Name and
Logo
Enter a hospital name in the Hospital Name textbox and it will be printed
on the report.
Click Set Hospital Logo and you can upload the hospital's logo.
Customize_1/2
When you fill in the Customize_1/2 textbox, the corresponding items in
the New Patient window will change into what is filled.
Memory
Select Memory in Basic Information window, the content of
Customize_1 in the New Patient windowwill be saved
If Memory is not selected, the content of Customize_1 in the New
Patient window will be empty.
ID Generating
Method
When the generating method is set to Auto, the patient ID can be
automatically generated according to the examination date.
When the generating method is set to Manual Input, you should enter the
patient ID manually in the New Patient window.
When the generating method is set to Accumulate, the patient IDcan be
increased by one automatically. You need to set the format and the starting
number for ID.
Display Order List
When selected, the Order List will be displayed on the Archives screen.
Display All List
When selected, the All List will be displayed on the Archives screen.
Refresh Interval
The refresh interval can be configured between 5 and 600s.
Work Mode
Configure the advanced options.