EDAN SONOTRAX Basic User Manual - 3.3 Probe Operation
SONOTRAX Series Ultrasonic Pocket Doppler User Manual Examining
- 14 -
CAUTION
1 If the Doppler is not used for an extended period, take the alkaline/NI-MH batteries
out and store them in a cool and dry environment.
2 Do not remove the NI-MH battery pack frequently after initial installation.
3 If the Doppler is not used for an extended period, charge the NI-MH batteries or the
NI-MH battery pack at least every three months.
3.3 Probe Operation
(1) Taking out the probe
Hold the main unit with one hand. Pinch the probe and pull it outwards using mild force.
Figure 3-4 Taking out the probe
(2) Placing the probe
Hold the main unit with one hand. Pinch the probe and align it with the probe holder. Push the
probe inwards using mild force until it clicks in position.