EDAN SONOTRAX Basic User Manual - page 28
SONOTRAX Series Ultrasonic Pocket Doppler User Manual Examining
- 23 -
Figure 4-2 Run the sound recorder
Perform FHR examination with the method described in section 4.1. When the ideal signal is
detected, unplug the earphone (if it’s connected) and insert the other plug of the audio cable into
the earphone socket on the Doppler.
Figure 4-3 Sound Recorder Figure 4-4 Recording
Click on the start key
to start recording, refer to figure 4-3.
You can record 60 seconds each time. When the time is up, click on the start key again to keep on
recording.
Click on the stop key
to stop recording, refer to figure 4-4.
Click on File > Save, input the file name, select a folder and click on Save to save the signals in a
“.wav” file.
To start a new recording, click on File > New.