EMotionLighting EML1205 Instruction Manual - Instructions
EML1205 INS
Rev: Jul 2013
pg. 12/12
Instructions
E. Troubleshooting
Problem
Cause
Remedy
Power Switch / Circuit Breaker trips.
1. Too much current.
1. Reduce the load on the outputs.
Output remains on full power.
1. Program calls for full power.
1. Try a different Pattern.
2. TRIAC overheated.
2. Reduce the load on the outputs and allow two minutes
to cool.
3. TRIAC damaged.
3. Contact the manufacturer:
support@emotionslighting.com
Pattern is not saved after shutdown.
1. Pattern is saved after display
timeout.
1. Power down the unit after the display timesout,
approximately 1 min after the last button is pressed.
Speed is not saved after shutdown.
1. Speed is saved after display
timeout or pattern is changed.
1. Power down the unit after the display timesout,
approximately 1 min after the last button is pressed. Or,
change the pattern before shutdown.
Output does not come on when expected. 1. Poor connection.
1. Use Pattern '00' to troubleshoot lights.
2. W rong Pattern.
2. Make sure the pattern supports the number of outputs
you are trying to use.
Patterns 52-81 are not available as
described in the User-Defined section.
1. These User Defined Settings
are locked.
1. Unlock these settings by changing the speed of
pattern 00 to 39 or "Hi".
Lights do not Dim and Brighten in the
correct order.
1. Lights are not connected to
the correct output.
1. Disconnect lights at the device and select program
'00'. Plug in the light sets one at a time while verifying
the correct light is in the correct output. See diagrams
on page 4 for Christmas Tree or page 5 for Traffic Lights.
F. Warranty
To qualify for this warranty, the product must be purchased from a dealer authorized by Simons Controls,
LLC. Warranty applies to first retail purchaser/owner during the first year of ownership. Warranty
excludes: normal wear, damage, neglect, storage conditions, failure to follow warnings, power surge and
Acts of God.
The product may be replaced or refurbished at the manufacturer’s discretion.
Keep your sales receipt. Return shipping for warranty service is paid by purchaser/owner.