Eml1205 ins rev: jul 2013 pg. 1/12 instruction manual for model: eml1205 simons controls, llc simpsonville, sc www.Emotionslighting.Com 864-404-1828 warning: do not put this product inside a tree. This product produces heat while in use. Do not cover this product with rug, tree skirt, etc. Warning: ...
Eml1205 ins rev: jul 2013 pg. 2/12 pattern descriptions type pattern # description type pattern # description 00 all on 44 ho ho ho merry xmas (on-off) 01 classic dig (6) 45 ho ho ho merry xmas (brt-dim) 02 classic (6) 46 drag lights 03 shimmer 47 traffic light 04 twinkle 48 traffic light delayed 05...
Eml1205 ins rev: jul 2013 pg. 3/12 medley playlists 32 classic dig (4) 20 classic dig (5) 1 classic dig (6) 7 waterfall 7 waterfall 7 waterfall 34 cascade dig (4) 22 cascade dig (5) 5 cascade dig (6) 4 twinkle 4 twinkle 4 twinkle 38 pyramid dig (4) 26 pyramid dig (5) 11 pyramid dig (6) 36 binary clo...
Eml1205 ins rev: jul 2013 pg. 4/12 instructions a. Christmas tree installation 1. Set up your christmas tree with the desired lights. 2. Place the device on the floor near the tree and away from moisture and combustibles. 3. Plug the device into a power outlet (120vac 60hz.) 4. Attach an extension c...
Eml1205 ins rev: jul 2013 pg. 5/12 instructions b. Traffic light installation (decorative use only) 1. Place device close to traffic lights. Unit should not be covered. Unit can be mounted in an enclosure that is heat tolerant and vented. 2. Keep away from combustibles. For indoor use only. 3. Plug ...
Eml1205 ins rev: jul 2013 pg. 6/12 instructions c. Controls 1. Power switch / circuit breaker directs power to controls and outputs. Loads over 5 amps can trip this breaker and shut down the device. 2. Display • display is active when device is first powered up or after button is pressed. • display ...
Eml1205 ins rev: jul 2013 pg. 7/12 instructions c. Controls (cont’d) 7. Saving settings • the device will automatically retrieve saved settings upon power up and changing patterns. • speeds and patterns are saved by the following rules: 1. One minute after the last button is pressed. • at the same t...
Eml1205 ins rev: jul 2013 pg. 8/12 instructions d. User defined pattern #51 – (for advanced users) (con’t) user defined settings configured with sample speed settings (traffic signal): type pattern # description sample speed setting 52 output 1 dwell 06 53 output 2 dwell 04 54 output 3 dwell 00 55 o...
Eml1205 ins rev: jul 2013 pg. 9/12 instructions d. User defined pattern #51 – (for advanced users) (con’t) traffic signal created by the sample speed settings on page 8: output 1 dwell, 52 = 6 output 2 dwell, 53 = 4 output 3 dwell, 54 = 0 output 4 dwell, 55 = 0 output 5 dwell, 56 = 10 output 6 dwell...
Eml1205 ins rev: jul 2013 pg. 10/12 instructions d. User defined pattern #51– (for advanced users) (con’t) time in seconds (approx.) for a time setting and pattern #51 speed setting * time 1 and time 2 have a minimum value of 1. Dwells can be set to zero. 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14...
Eml1205 ins rev: jul 2013 pg. 11/12 instructions d. User defined pattern #51 – (for advanced users) (con’t) time in seconds (approx.) for a time setting and pattern #51 speed setting * time 1 and time 2 have a minimum value of 1. Dwells can be set to zero. 20 21 22 23 24 25 26 27 28 29 30 31 32 33 3...
Eml1205 ins rev: jul 2013 pg. 12/12 instructions e. Troubleshooting problem cause remedy power switch / circuit breaker trips. 1. Too much current. 1. Reduce the load on the outputs. Output remains on full power. 1. Program calls for full power. 1. Try a different pattern. 2. Triac overheated. 2. Re...
