EYEsurv ESC-Z30 Wiring manual - page 4
Manual is about: 30X Optical Zoom Camera w/ auto
focus - 3.0 - 90.0mm Zoom Lens
of
10
or PTZ controller. The A is Positive (TX+) and the B is negative (TX-) The type of
wires used here do not need to be real robust. In our example, we simply used
18/2 stranded power wires, but you can actually use speaker wires or the thin
single wires within Cat5 cable if you wish. Whatever you use, please note that
polarity does matter so please ensure that you got the positive and negative wires
in the correct inputs.
(Your camera connections should look just like this ^)
Step 5
: Next, connect the end of the BNC connection to the back of your EYEsurv
Zoom camera.
-Once you have completed these steps the back of your camera should
look like the picture below.