EYEsurv ESC-Z30 Wiring manual - Eyesurv Esc-Z30
Step 8:
Lastly, you will need to connect the power cables to the power supply. In
our example we used a standard 12VDC power supply. Once again, polarity does
matter so please follow this step accordingly to wire it correctly.
Configuring your DVR/PTZ Controller and
EYEsurv ESC-Z30
Introduction
:
This tutorial will explain how to get your DVR/PTZ Controller and
your Z30 camera communicating with each other by matching up three things:
Camera ID, Protocol, Baud Rate. This tutorial is necessary in the connection
process, so please, follow each step thoroughly to get your camera and DVR
connected properly.
Opening The Menu-
Now we will need to check the settings on the camera, do
this by pressing the "Menu" button on the back of the camera, this will bring up
the Setup Menu on your screen.