Falcon 1092 Deluxe Dual Fuel User's Manual & Installation And Servicing Instructions - Stainless  Steel  Hob

14

Cleaning your cooker

Before thorough cleaning, isolate from the 

electricity supply. Remember to switch on the 

electricity supply before use.

Never use paint solvents, washing soda, 

caustic cleaners, biological powders, bleach, 

chlorine based bleach cleaners, coarse 

abrasives or salt. Don’t mix different cleaning 

products - they may react together with 

hazardous results. Do not use a steam cleaner 

on your cooker.

If you want to move your cooker for cleaning, 

see the section called ‘

Moving your cooker

’.

All parts of the cooker can be cleaned with 

hot soapy water - but take care that no surplus 

water seeps into the appliance.

Stainless  Steel  Hob

Lift away pots or pans from hob. Remove pan 

supports from spillage area and carefully place 

in a sink of warm soapy water. Wipe loose 

debris from hob.

Avoid using any abrasive cleaners including 

cream cleaners, e.g. Cif, on brushed Stainless 

Steel surfaces. For best results use a liquid 

detergent e.g. Domestos Multi Surface Cleaner.

Rinse with cold water and thoroughly dry 

with a clean, soft cloth. Ensure all parts are dry 

before repositioning.

Hotplate  burners

The burner heads and caps can be removed 

for cleaning. Make sure they are absolutely dry 

before replacing.

Burner head

Burner Base

When fitting burner head, ensure this locates 

properly within the base.

Check burner ports are not blocked. If blockage 

occurs, remove stubborn particles using a 

piece of fuse wire.

Glide-Out

™

Grill

Before you remove any of the grill parts for 

cleaning make sure that they are cool.

The grill pan and grid should be washed in hot 

soapy water. After grilling meats or any foods 

that soil, leave to soak for a few minutes in the 

sink immediately after use. Stubborn particles 

may be removed from the grid by using a nylon 

brush. Alternatively the grill pan can be washed 

in a dish washer.

To remove the grill pan support frame, pull the 

grill pan forward.

Lift the grill pan clear of the support frame.

The support frame is held to the side rails by 

two clips on each side.

For each side , support the side rail with one 

hand and with the other hand lift the frame up 

and out of the  side clips.