Falcon Elan U109645 - 02 Installation & service instructions manual - page 19
19 U109645
INSTALLATION
Check that the appliance is electrically safe when you have finished.
Australia
Now unscrew the existing bulb anticlockwise, taking
care to protect your fingers with a glove in case the bulb
should shatter.
Screw in the new bulb clockwise and then screw the bulb
cover back on. Turn on the electricity supply and check
that the bulb now lights.
Installation
Dear Installer
Before you start your installation, please complete the
details below, so that, if your customer has a problem
relating to your installation, they will be able to contact
you easily.
Installer’s Name
Installer’s Company
Installer’s Telephone number
Safety Requirements
The cooker must be installed, in a well ventilated space,
in accordance with the subsequent section entitled
Electrical Connection.
Read these instructions before installing or using the
appliance.
Provision of Ventilation
This appliance is not connected to a combustion products
evacuation device. Therefore, particular attention must
be given to the relevant local requirements regarding
ventilation.
All rooms require a window that can be opened, or
equivalent, while some rooms require a permanent vent
in addition to the window.
Location of Cooker
The cooker may be installed in a kitchen/kitchen diner but
NOT in a room containing a bath or shower.
This appliance is designed for domestic cooking
only. Use for any other purpose could invalidate any
warranty or liability claim.