FARGO Electronics C16 Service Manual - page 9
Manual is about: FARGO Electronics Card Printer Service Manual C16
of
259
RESTRICTED USE ONLY
FARGO Electronic, Inc.
Persona C16 Card Printer Service Manual (Rev. 5.0)
ix
Reviewing the C16 Boot up Sequence
Step Process
1
On Power up, the Printer checks the current state of the Card Feed Sensor and
the Headlift Sensor.
2
If the Headlift Sensor is found to be open, the Headlift Motor will turn until a
closed state is seen.
3
If the Card Feed Sensor is found to be blocked, the Card Feed Stepper will
engage to eject the card.