FratelliOnofri FREV905D Owner's Manual And Installation Instructions - page 13
Timed Cooking
WARNING
Food Poisoning Hazard
Do not let food sit in oven more than one hour before
or after cooking.
Doing so can result in food poisoning or sickness.
Timer setting
Setting the clock
Press the control knob and turn clockwise.
Minute-minder knob (if fitted)
Turn the knob clockwise to set the
desired cooking time.
The minutes minder can be adjusted
from 1 to 60 minutes.
A sound signal will inform you that the
choosen time is up.
13
Using the electric oven
Throughout this manual, features and appearance may vary from your model.
Electronic cooker programmer (if fitted)
(command only the left oven in Twin models)
Features: 24 hours clock with automatic programme and
minutes counter.
Functions: Cooking time, cooking end time, manual position,
clock, minutes counter, times to be set up to 23 hours 59
minutes.
Display
7-segments display for cooking times and time of day.
Cooking time and manual function= saucepan symbol
Automatic function
= AUTO
Minutes counter
= bell symbol
The symbols light up when the corresponding functions are
selected.
Setting
To set, press and release the desired function, and within 5
seconds set the time with + and buttons.
+ and buttons
The + and buttons increase or decrease the time at a speed
depending on how long the button is pressed.
Setting the time
Press any two buttons (cooking time, end time, minutes
counter) at the same time, and + or button to set the desired
time. This deletes any previously set programme. The contacts
are switched off and the AUTO symbol flashes.
Manual use
By pressing the manual button the relay contacts switch on,
the AUTO symbol switches off and the saucepan symbol lights
up. Manual operation can only be enabled after the automatic
programme is over ot it has been cancelled.
Automatic use
Press the cooking time or end time button to switch
automatically from the manual to the automatic function.
Semi-automatic use with cooking time setting.
Press the cooking time button and set the desired time with
+ or -. The AUTO and cooking time symbols light up
continuously. The relay switches on immediately. When the
cooking end time corresponds to the time of day, the relay
and cooking time symbol switch off, the sound signal rings
and the AUTO symbol flashes.
Automatic use with cooking time and end time setting
Press the cooking time button and select the length of the
cooking time with + or button. The AUTO and cooking time
symbols light up continuously. The relay switches on. By
pressing the cooking end time button the next cooking end
time appears on the display. Set the cooking end time with
+ button. The relay and the cooking time symbol switch off.
The symbol lights up again when the time of day corresponds
to the cooking start time. When the cooking time is up, the
AUTO symbol flashes, the sound signal rings, the cooking
time symbol and the relay switch off.
Minutes counter
Press the minutes counter button and set the cooking time
with + or button.
The bell symbol lights up when the minutes counter is
operating. When the set time is up, the sound signal rings
and the bell symbol switches off.
Sound signal
The sound signal starts at the end of a programme or of the
minutes counter function and it lasts for 15 minutes.
To stop it, push any one of the functions buttons.
Start programme and check
The programme starts 4 seconds after it has been set.
The programme can be checked at any time by pressing the
corresponding button.
Setting error
A setting error is made if the time of day on the clock falls
within the cooking start and end times.
To correct the setting error, change the cooking time or cooking
end time.
The relays switch off when a setting error is made.
Cancelling a setting
To cancel a setting, press the cooking time button and then
press the button until 00 00 appears on the display.
A set programme will automatically cancel on completion.
A
U
T
O
Minute timer
Cooking time
Cooking end
Manual
Subtract time
Add time
30
5
10
15
20
25
35
40
45
50
55
Operating Instructions
Care and Cleaning
Inst
allation Instructions
Troubleshooting
Tips
Safety Instructions
PROGRAMMER WITH COOKING END
TIME (if fitted)
For a manual operation of the
programmer, turn the knob anticlockwise
to . Adjust the cooking time by turning
the knob clockwise. Select the cooking
time with the relevant knob (max.120
min.). The oven will switch off
automatically when the cooking is up.
Semi-automatic use with end time setting
Press the end time button. The time of day appears on the
display. Set the cooking end time with + button.
The AUTO and cooking time symbols light up continuously.
The relay contacts switch on.When the cooking end time
corresponds to the time of day, the relay and the cooking
time symbol switch off.
When the cooking time is up, the AUTO symbol flashes, the
sound signal rings and both the relay and the cooking time
button switch off.
0
80
70
90
100
11
0
120
stop
60
50
40
30
20
10
PROGRAMMER (if fitted)
For a manual operation of the
programmer, turn the knob
clockwise to .
Adjust the cooking time by turning
the knob clockwise.
Select the cooking time with the
relevant knob (max. 90 min.).
The oven will switch off
automatically when the cooking
is up and an alarm will sound.
To cancel it, turn the knob to the bell .
12
9
6
3