Gaggenau CV 282 Instruction Manual - page 15
15
Operating the appliance
en
Selecting a hotplate and heat setting
The hob must be switched on.
1
Select the hotplate. To do this, touch the twist knob
in the appropriate area for the required hotplate.
2
Within the next 10 seconds, turn the twist knob until
the required heat setting appears in the heat setting
display.
The heat setting is set.
Notes
–
When placing an item of cookware on the flexible
cooking zone, it must be positioned correctly
according to size; see the section entitled ~
"Flex
function"
.
The cookware is detected and the hotplate is
selected automatically. You can now configure the
settings.
–
If the indicators flash after you have changed the
settings, check whether the cookware is suitable for
induction cooking. See the section entitled
~
"Cookware test"
.
Changing the heat setting
Select the hotplate and change the heat setting using
the twist knob.
Switching off the hotplate
Select the hotplate and turn the twist knob until
‹
appears. The hotplate switches itself off and the
residual heat indicator lights up.
Notes
–
If there is no cookware on the induction hotplate,
the heat setting display flashes. After a while, the
hotplate will switch itself off.
–
If there is cookware on the hotplate before
switching the hob on, this is detected at most 20
seconds after touching the main switch and the
hotplate is selected automatically. Set the heat
setting within the next 10 seconds. Otherwise the
hotplate will switch itself off again after 20
seconds.
Even if there are several pots and pans on the hob
when it is switched on, only one item of cookware is
detected.
Switching the ventilation system on
and off
Note: Always adjust the setting according to the current
conditions. To eliminate strong cooking smells, select a
high fan setting.
Note: If no metal grease filter is available, the
ventilation system cannot be switched on. Insert the
metal grease filter. The hob functions are also available
if there is no metal grease filter.~
"Cleaning"
on page 40
Note: Using tall items of cookware may prevent the
extraction system from working at optimum power. The
extraction power can be improved by placing a lid on the
cookware at an angle.
Note: Do not obstruct the ventilation openings. Do not
place objects on the filter cover, as this will reduce the
power of the ventilation system.
Switching on the ventilation system
Note: If
”
‚¯†“ ¥£
flashes on the display panel and
}
symbol is not available, insert the metal grease filters
correctly.
}
is shown on the display panel. The ventilation system
can be switched on.
1
Touch the
}
symbol.
The
}
symbol will be lit orange. The ventilation
system will start at fan setting
ƒ
. The fan setting
that is selected will be shown on the display panel.
Notes
–
Heat settings cannot be changed while the
ventilation system fan settings are being
configured.
–
During a period of a few seconds, a fan setting
for the ventilation system can be selected. The
}
symbol will be lit white when the Twist knob
can be used to configure the heat settings again.
2
Use the twist knob to select the required setting.
The fan setting that is selected will be shown on the
display panel.
3
To set a different fan setting, touch the
}
symbol
and use the twist knob to select the required
setting.
The fan setting that is selected will be shown on the
display panel.
Z
Z