Galletti AREO 12 Technical Manual - Areo
21
AP66000265 - 03
All copying, even partial, of this manual is strictly forbidden
AREO
MYCOMFORT MEDIUM - Wall-mounted
microprocessor control, GALLETTI model
MYCOMFORT MEDIUM having the following main
features:
- room air temperature reading and adjustment
- room humidity reading and adjustment
- water temperature reading (water sensor as an
optional)
- manual and automatic adjustment of fan speed
- manual and automatic switching of heating and
cooling mode depending on the water temperature within the heat
exchanger or on the room temperature, with a neutral zone that can be
selected in the range from 2° to 5°C.
- serial por t for Bus connection
The controller is equipped with a large display (3”) to show and set all the
functions of the unit.
Using the installation kit available, MYCOMFORT can be mounted on the
unit
MYCOMFORT LARGE - Wall-mounted
microprocessor control, GALLETTI model
MYCOMFORT LARGE having
the following main features:
- room air temperature reading and adjustment
- room humidity reading and adjustment
- water temperature reading (water sensor as an
optional)
- manual and automatic adjustment of fan speed
- manual and automatic switching of heating and
cooling mode depending on the water temperature
within the heat exchanger or on the room temperature, with a neutral
zone that can be selected in the range from 2° to 5°C.
- clock and hourly timer-programmed operation.
- 2 analogue outputs for controlling modulating devices 0-10V
- 2 digital outputs for controlling (On/Off) external devices (no-voltage
contacts)
- serial por t for Bus connection
The controller is equipped with a large display (3”) to show and set all the
functions of the unit.
Using the installation kit available, MYCOMFORT can be mounted on the
unit
LED503
Recess wall-mounted microprocessor control
The proposed microprocessor control panels for
Galletti indoor units is completed by the LED503
command with LED display that is designed for
recess wall mounting.
CONTROLLER
The control software developed by the Galletti
Software Dept., features:
- manual selection of fan speed;
- automatic selection of fan speed according to the difference between the
set temperature and the room air temperature;
- manual selection of heating/cooling operating mode;
- automatic selection of heating/cooling operating mode;
- control of 1 or 2 ON/OFF valves;
- control of additional heating element;
- on board timer function to detect the actual ambient temperature;
- reading of air ambient temperature, set point, fan speed and mode
selection on the LED display.
15
ACCESSORIES
CD - Flush wall-mounted speed selector
Flush wall mounted control panel is provided with a 4
positions (3 speed + stop) rotation selector.
This control panel, that can be matched with all the AREO
230V single phase models, allows the ON/OFF and fan
speed selection of the fan coil unit.
CDE - Wall-mounted speed selector
Wall mounted control panel is provided with a 3
positions (3 speed ) and switch ON/OFF .
This control panel, that can be matched with all the
AREO 230V single phase models, allows the ON/OFF
and fan speed selection of the fan coil unit.
TD - Wall mounted control with speed
selector,thermostat and summer-winter
selector
Wall mounted control panel complete with
fan speed selector, electromechanical
thermostat and cooling / heating mode
selector.
This control panel, that can be matched with all the AREO 230V single phase
models, allows the fan speed control, regulation of the room temperature and
cooling / heating mode selection:
- manual setting of the fan speed;
- room temperature regulation both in cooling / heating mode, by m e a n s
of fan start/stop, at a manually set temperature.
TDC - Wall mounted control with speed
selector and thermostat
Wall mounted control panel complete with fan
speed selector, and electromechanical
thermostat .
This control panel, that can be matched with
all the AREO 230V single phase models, allows the fanan speed control,
regulation of the room temperature:
- manual setting of the fan speed;
- room temperature regulation in heating mode, by means of fan start/
stop, at a manually set temperature.
- regulation of the room temperature both in heating and cooling mode
when connected to a remote centralised summer-winter selector
MYCOMFORT BASE - Wall-mounted microproces-
sor control, GALLETTI model
MYCOMFORT BASE having the following main features:
- room air temperature reading and adjustment
- water temperature reading (water sensor as an
optional)
- manual and automatic adjustment of fan speed
- manual and automatic switching of heating and
cooling mode depending on the water temperature
within the heat exchanger or on the room temperature,
with a neutral zone that can be selected in the range from 2° to 5°C.
The controller is equipped with a large display (3”) to show and set all the
functions of the unit.
Using the installation kit available, MYCOMFORT can be mounted on the unit
0
3
2
1