1. DL manuals
  2. Ganz
  3. Security Camera
  4. PIXELPRO SERIES
  5. Installation Manual

Ganz PIXELPRO SERIES Installation Manual

Manual is about: H.264, with GXi Technology

Summary of PIXELPRO SERIES

  • Page 1

    03-2014-a 1.

  • Page 2

    Pixelpro gxi series zn-dn312xe series installation guide 03-2014-a 2 precaution please read this manual carefully before installing the unit. Never disassemble the camera. Unauthorized disassembly may cause equipment failure or damage to the unit. Please do not install the camera in a place exposed ...

  • Page 3

    Pixelpro gxi series zn-dn312xe series installation guide 03-2014-a 3 table of contents precaution ................................................................................................................ 2 1. Features ..............................................................................

  • Page 4

    Pixelpro gxi series zn-dn312xe series installation guide 03-2014-a 4 1. Features camera 1/2.7” 1080p cmos image sensor true day/night dc auto iris lens wdr remote zoom/focus control (one click focus) [xe-m model only] weather proof (ip66) vandal proof (ik10) video h.264 baseline, main, high profile(...

  • Page 5

    Pixelpro gxi series zn-dn312xe series installation guide 03-2014-a 5 2. Package contents please unpack the package carefully and handle the equipment with care. The package contains: camera dc power adaptor dc power jack cable terminal blocks video output cable screws and anchors installation templa...

  • Page 6

    Pixelpro gxi series zn-dn312xe series installation guide 03-2014-a 6 3. Part names ① reset button use the button to restart the device or to reset it to factory default. Refer to “6.3. Reset” and “6.4. Fact ory default ” for more details. ② focus button(s) use the buttons to automatically/manually d...

  • Page 7

    Pixelpro gxi series zn-dn312xe series installation guide 03-2014-a 7 ③ zoom button(s) use the buttons to manually determine correct zoom. ④ pal/ntsc button pressing the button cycles through pal, ntsc, and no video output mode no video > pal > ntsc. ⑤ terminal connector connector for cable connectio...

  • Page 8

    Pixelpro gxi series zn-dn312xe series installation guide 03-2014-a 8 4. Installation 4.1. Installing the camera caution ! To prevent products from damage, place the camera on stable and non-vibrating surfaces. If the stability is in doubt, consult safety personnel for reinforcements, and then procee...

  • Page 9

    Pixelpro gxi series zn-dn312xe series installation guide 03-2014-a 9 installation template (unit: mm) caution ! Installation template’s image size scale in this installation guide is not 1:1. The correct-size template design paper can be found inside the package separately. φ 152.

  • Page 10

    Pixelpro gxi series zn-dn312xe series installation guide 03-2014-a 10 4.2. Adjusting the angle of the camera adjust the lens to the desired position by manually moving its upper lens shell, reinforced body or horizontal platform in the following directions. Caution ! Refrain from continuously rotati...

  • Page 11

    Pixelpro gxi series zn-dn312xe series installation guide 03-2014-a 11 4.3.2. Xe-m models (remote zoom/focus control models) use zoom in/out buttons (tele/wide) to adjust the camera’s angle of view. Use focus buttons (far/near/focus) to automatically/manually determine correct focus. Lens zoom/focus ...

  • Page 12

    Pixelpro gxi series zn-dn312xe series installation guide 03-2014-a 12 4.4. Setting the image attribute through the camera’s webpage, users can configure image settings. The menu of image attribute is available under video appearance menu in setup > video & audio > camera. The following features can ...

  • Page 13

    Pixelpro gxi series zn-dn312xe series installation guide 03-2014-a 13 5. Connections ① audio connection the camera provides a mono audio input and output. Due to low audio output power, an amplified speaker is recommended for enhanced sound (refrain from connecting a headphone or an earphone directl...

  • Page 14

    Pixelpro gxi series zn-dn312xe series installation guide 03-2014-a 14 ② sensor (di) connection sensor (di) can be connected to either a voltage type sensor or a relay type sensor as the following figures. The interface type can be controlled by web user interface. Refer to the provided “pixelpro gxi...

  • Page 15

    Pixelpro gxi series zn-dn312xe series installation guide 03-2014-a 15 ④ analog video out connection use a 75 ohm video coaxial cable to connect to a monitor’s analog video input and check the camera’s connection and its image focus at the installation site. Be sure to press the output configuration ...

  • Page 16

    Pixelpro gxi series zn-dn312xe series installation guide 03-2014-a 16 6. Configuration 6.1. Set up network environment the default ip address of the device is 192.168.Xxx.Xxx. Users can identify the ip address of the device from converting the mac address’s hexadecimal numbers, which is attached to ...

  • Page 17

    Pixelpro gxi series zn-dn312xe series installation guide 03-2014-a 17 6.1.2. Custom ip environment ipadmintool is a management tool, which automatically scans all of the network products for users to perform administrative tasks, which includes network configurations, firmware update, device reboot,...

  • Page 18

    Pixelpro gxi series zn-dn312xe series installation guide 03-2014-a 18 6.2. View video on web page type the proper ip address to view the live streaming images through a web browser. The default username and password is root / pass. 6.2.1. Activex installation 1. When the browser asks to install the ...

  • Page 19

    Pixelpro gxi series zn-dn312xe series installation guide 03-2014-a 19 caution ! 6.2.2. View video using ipadmin tool ipadmintool automatically searches all activated network encoders and ip cameras and shows the product name, ip address, mac address and etc. 1. From the ipadmintool’s product list, s...

  • Page 20

    Pixelpro gxi series zn-dn312xe series installation guide 03-2014-a 20 6.3. Reset 1. Press the reset button for 2 seconds while the device is in use. 2. Wait for the system to reboot. Caution ! Please do not hold for more than 2 seconds. Otherwise, the camera may be switched to its factory default se...

  • Page 21

    Pixelpro gxi series zn-dn312xe series installation guide 03-2014-a 21 6.5. Safe mode what is safe mode? Your ip camera or encoder could encounter an unexpected occasion such as broken firmware file or uncompleted loading of firmware file during system booting. To restore the device from the occasion...

  • Page 22

    Pixelpro gxi series zn-dn312xe series installation guide 03-2014-a 22 note i there is another method to update firmware, which is using ipadmintool. Please refer to ‘ipadmintool user’s manual.Pdf’ for the detailed procedure. Note i if your device is still at safe mode after trying to update firmware...

  • Page 23

    Pixelpro gxi series zn-dn312xe series installation guide 03-2014-a 23 appendix (a): specifications summary zn-dn312xe camera module cmos image sensor 1/2.7” 1080p cmos effective pixels 1920x1080 scanning system progressive scanning electrical resolution 1920 x 1080 min. Illumination color: 0.5 lux ,...

  • Page 24

    Pixelpro gxi series zn-dn312xe series installation guide 03-2014-a 24 video compression format h.264, mjpeg selectable per stream number of streams dual stream, configurable resolution 1920 x 1080, 1280 x 720, 1120 x 630, 960 x 540, 800 x 450, 640 x 360, 480 x 270, 320 x 180 compression fps 30fps@10...

  • Page 25

    Pixelpro gxi series zn-dn312xe series installation guide 03-2014-a 25 electrical characteristics power source 12vdc / poe ieee802.3af power consumption 4.68w@12vdc video output 1 vp-p, 75Ω, composite audio input mic in, 0.178vp-p, 10k Ω audio output line out, 2.26vp-p, 10k Ω d/i max 50ma@5vdc, ttl l...

  • Page 26

    Pixelpro gxi series zn-dn312xe series installation guide 03-2014-a 26 appendix (b): power over ethernet the power over ethernet (poe) is designed to extract power from a conventional twisted pair category 5 ethernet cable, conforming to the ieee 802.3af power-over-ethernet (poe) standard. Ieee 802.3...

  • Page 27

    Pixelpro gxi series zn-dn312xe series installation guide 03-2014-a 27 appendix (c): dimensions (unit: mm).

  • Page 28

    Pixelpro gxi series zn-dn312xe series installation guide 03-2014-a 28 appendix (d): hexadecimal-decimal conversion table refer to the following table when you convert the mac address of your device to ip address. Hex dec hex dec hex dec hex dec hex dec hex dec hex dec 0 0 25 37 4a 74 6f 111 94 148 b...

  • Page 29

    Pixelpro gxi series zn-dn312xe series installation guide 03-2014-a 29 revision history man# date(m/d/y) comments 01a.01 03/30/2012 created 01a.02 04/24/2012 overall modification and device function verification 01a.03 05/03/2012 configuration update 01a.01 03/12/2013 created 03-2014-a 03/31/2014 mod...