Garmin GMX 200 Installation Manual - page 36
Page 5-2
GMX 200 Installation Manual
Revision D
190-00607-04
5.1.2 GMX 200 I/O Data Port Configuration
The I/O product variation of the GMX 200 supports an array of additional I/O capabilities on connector
J2002 as shown below.
NOTE
The systems connected to the GMX 200 I/O ports must be connected as shown in
Appendix E since reconfiguration by software is not available.
Table 5-2. GMX 200 I/O Data Port Configurations (P2002)
GMX 200 I/O Only
Port
Type
Description
ARINC 453/708 In 1
ARINC 453
Weather Radar Display
ARINC 429 Out 2
ARINC 429
Weather Radar Control
Discrete Out 1
Active Low Discrete
Weather Radar Power
ARINC 429 In 1
ARINC 429
Traffic Display
Discrete Out 2 and 3
Active Low Discrete
TAS Mode Control
RS-232 Port 1, 2, 3, 4 or 5 [1]
RS-232
Ryan TCAD Traffic
ARINC 453/708 In 2
ARINC 453
Terrain Display
ARINC 429 Out 1
ARINC 429
Terrain Control
ARINC 429 In 2
ARINC 429
Terrain Status
[1] Ryan TCAD function is only available in the GMX 200 I/O model, even though the RS-232 ports are found
on P2001 and not P2002.