Garmin MX20 Installation Manual - 1.7  License Requirements

Introduction 

6 

560-1025-09 Rev E 

MX20 Installation Manual 

1.6  Special Tools Required 

Crimp Tool 

A crimp tool meeting MIL specification M22520/1-01 and a positioner/locator are required to ensure 

consistent, reliable crimp contact connections for the rear d-sub connectors. Examples of these tools are 

shown below: 

For pin P/N 245-0027 

ITT Cannon 

Phone   714 261 5300 

1851 E. Deere Ave.  

Fax 

714 575 8324 

Santa Ana, CA 92705-6500 

Insertion tool: 

ITT part # 274-7006-000 (Desc. CIET-20HD) 

Regular-duty Crimp tool: 

ITT part # 995-0001-585 (Desc. M22520/1-01)  

Regular-duty Locator tool: 

ITT part # 995-0001-244 (Desc. TH25) 

Heavy-duty Crimp tool: 

ITT part # 995-0001-584 (Desc. M22520/2-01) 

Heavy-duty Locator tool: 

ITT part # 995-0001-604 (Desc. M22520/2-08) 

For pin P/N 245-0059 (High Density Connector – I/O Only) 

Astro Tool Corp 

Phone  503 642 9853 

21615 SW TV Highway 

Fax 

503 591 7766 

Beaverton, OR 97006 

Crimp tool: 

Astro Tool part # 615708 

Positioner: 

Astro Tool part # 616356 

1.7  License Requirements 

There are no license requirements for the MX20.  

1.8  Operating Instructions 

The MX20 Pilot’s Guide, Garmin AT P/N 560-1026-(  ), covers operation and pilot interface. The MX20 

Quick Reference Guide is P/N 561-0263-(  ).