Garmin MX20 Installation Manual - page 59
Specifications
MX20 Installation Manual
560-1025-09 Rev E
49
Bendix/King ART2000 Radar
(Bendix/King P/N 071-01519-0101)
(MX20 I/O Model Only)
Weather Source (Continued)...........................Bendix/King ART2100 (Bendix/King P/N 071-01550-
0101) (MX20 I/O Model Only) Note 1
Allied Signal RS-181A (King P/N 071-1315-00;
Bendix/King P/N 3614077-8101) (MX20 I/O Model
Only)
L-3 (Goodrich) WX500
Terrain TAWS Source.....................................L-3 (Goodrich) Landmark TAWS 8000 (MX20 I/O Model
(Only one TAWS source may be
Only)
connected to the MX20)
Honeywell KGP-560 EGPWS(MX20 I/O Model Only)
Honeywell KMH 820 (MX20 I/O Model Only)
Audio Source...................................................Garmin AT GDL 69A with XM Satellite Radio
Subscription
Note 1: The ART2100 is supported when configured to emulate an ART2000. Only ART2000 functions are available.
3.1.11 Physical Specifications
Height ..............................................................5.00 inches (12.7 cm)
Width...............................................................6.25 inches (15.88 cm)
Depth ...............................................................8.00 inches (20.3 cm)
Table 3-2. Unit Weights
Unit Weight
MX20 only, with GPS
4.08 lb.
(1.85 kg)
MX20 only, without GPS
3.92 lb.
(1.78 kg)
MX20 only, with I/O Option
4.07 lb.
(1.85 kg)
MX20 mounting tray only
0.73 lb.
(0.33 kg)
3.1.12 Environmental Specifications
Operating Temperature ...................................-20°C to +55
C
Storage Temperature .......................................-55
C to +85C
Temperature Variation ....................................2
C per minute
Humidity..........................................................95% at 50
C
Maximum altitude ...........................................35,000 ft
Cooling............................................................Not Required