Garmin nüvi 205W Series Quick Start Manual - Step 1: Mount Your Nüvi
nüvi05seriesquickstartmanual
Step 1: Mount Your nüvi
1. Plug the vehicle power cable into the back of your nüvi.
2. Snap the cradle onto the suction cup arm.
3. Clean and dry your windshield and the suction cup
with a lint-free cloth. Remove the clear plastic from the
suction cup. Place the suction cup on the windshield.
4. Flip the lever back toward the windshield.
5. Fit the bottom of your nüvi into the cradle.
6. Tilt your nüvi back until it snaps into place.
7. Plug the other end of the vehicle power cable into
a power outlet in your vehicle. Your unit should turn
on automatically if it is plugged in and the vehicle is
running.
8.IfyouareusingatrafficreceiverinEurope,connectthe
externalantennatothetrafficreceiverandsecureitto
thewindshieldusingthesuctioncups.(Trafficreceivers
are included in some nüvi 205 series packages.)
Step 2: Configure Your nüvi
To turn your nüvi on, slide the
Power
key to the left. Follow the on-screen
instructions. To turn your nüvi off, slide the
Power
key to the left.
Step 3: Acquire Satellites
1.Gooutdoorstoanopenarea,awayfromtallbuildingsandtrees.
2. Turn on your nüvi.
Suctioncupmount
Cradle
Suctioncupmount
Cradle
Vehiclepower
cable
Vehiclepower
cable