Goldweb GP-L200N User Manual - 3.1   Tcp/ip Settings

GP-L200N User Manual                                                                                     

8 

3   Wireless Network Configuration 

The Web management tool allows you to configure only the wireless function of the 

GP-L200N, but not PLC function. You need to install the PowerLine Utility to 

configure the PLC function. The recommended browser is IE 5.0 or above. 

The following sections describe how to set the Internet connection, local Ethernet 

connection, and wireless connection, and how to access the Web page of the 

GP-L200N. 

3.1   TCP/IP Settings 

By default, the IP address of LAN interface of the GP-L200N is 192.168.1.1.The 

subnet mask is 255.255.255.0. The DHCP Server is enabled. 

It is recommended that you set the network adapter to be Obtain an IP address 

automatically. Your PC obtains IP address, subnet mask, gateway, and DNS 

address automatically via the extender. If you know the setting of the current LAN 

interface, you can manually set the TCP/IP properties of the network adapter, so 

that your PC can communicate with the extender. 

To manually set the network adapter, do as follows: 

Step 1 

Right-click the icon of My Network Places and choose Properties from 

the menu. The Network Connections page appears. 

Step 2 

Right-click the network adapter icon and choose Properties from the 

menu. The Local Area Connections Properties window appears. Note: 

If there are several network cards on your PC, a window other than the 

Local Area Connections Properties may appear.