Goldweb GP-L200N User Manual - 4.3.2   Upload Firmware

GP-L200N User Manual                                                                                     

49 

  Note: 

If you forget the account and the password, please press the Reset button. The 

system restores to the factory default settings. The default account and the 

password are admin and admin respectively.   

4.3.2   Upload Firmware 

Choose  Administration > Upload Firmware to display the Upload Firmware 

page. 

To upload the firmware of the GP-L200N, click Browse…to select the correct 

firmware and click Apply. The system begins to upgrade firmware. 

After upgrading, the system reboots and automatically enters the Web page. 

The procedure for upgrading the Bootloader is similar to the procedure for 

upgrading the firmware. 

  Note: 

After the firmware is upgraded, the AP restores to the factory defaults. To avoid 

data loss, please save the settings before upgrading firmware. During 

upgrading, do not cut off the power or press the Reset button.