Goldweb GP-L200N User Manual - page 68
GP-L200N User Manual
62
The Privacy screen provides the user with an option to maintain security for their
logical network and also to select the devices that has to be included in the network.
The appearance is shown in below figure.
All HomePlug devices are shipped using a default logical network (network name),
which is normally “HomePlug”. The Privacy dialog screen allows user to change
to a private network by changing the network name (network password) of devices.
The user can always reset to the HomePlug network (Public) by entering
“HomePlug” as the network name or by clicking Use Default.
Note:
If the network name is changed to anything other than HomePlug, the Network
Type in the main tab is displayed as Private.
Set Local Device Only
This button can be used to change the network name (network password) of the
local device. If a new network password is entered, all the devices shown in the
Main tab prior to this are no longer present in the new network, effectively making
the local devices not to communicate to the devices that are in the old logical