Goldweb GP-L200N User Manual - page 66
GP-L200N User Manual
60
device. The scan status option is displayed in the upper right corner of the Remote
device panel, indicating whether the Autoscan functionality is turned on. The
following information is displayed for all devices that appear in the lower panel.
Device Name
This column shows the default device name, which can be user re-defined. You
can change the name by either clicking Rename in the lower area of the window or
clicking the name and editing in the table.
Password
This column is blank by default and you can click Enter Password to set a
password.
To set the Password of the device (required when creating a private network), click
the name of a device in the lower panel to select the device and click Enter
Password. In the window that is displayed, enter the password and click OK. The
Password field accepts is not case-sensitive and can contain dashes.
A dialog box appears, asking whether the password is entered correctly. If a device
is not found, you are notified along with the suggestions to resolve common
problems. This process may take a few seconds.
MAC Address
This column shows the MAC address of the remote device.