Goldweb GP-L200N User Manual - page 27
GP-L200N User Manual
21
The following table describes parameters in the Lazy Mode:
Field
Description
WDS Mode
Select the Bridge Mode.
Phy Mode
You can select CCK, OFDM, HTMIX, or GREENFIELD.
Encryp Type
You can select NONE, WEP, TKIP, or AES. If you select WEP,
TKIP, or AES, you need to set the encryption key.
Encryp Key
Enter the encryption key.
AP MAC
Address
The MAC address of another AP that connects to the
GP-L200N by using WDS.
Step 2
In the Basic Wireless Settings page, set the same physical mode and
encryption type as the peer AP, enter the MAC address of the peer AP,
and then click Apply to save the settings. The GP-L200N then works in
the Bridge mode.
Step 3
Choose Wireless Settings > Security. In the Wireless
Security/Encryption Settings page that is displayed, set the Security
Mode of the GP-L200N to accord with the peer AP.