Haag-Streit BX 900 Instructions For Use Manual - page 4
4
DEUTSCH
ENGLISH
FRANÇAIS
ITALIANO
ESPAÑOL
NEDERLANDS
PORTUGUÊS
SVENSKA
DEUTSCH
ENGLISH
FRANÇAIS
ITALIANO
ESPAÑOL
NEDERLANDS
PORTUGUÊS
SVENSKA
© HAAG-STREIT AG, 3098 Koeniz, Switzerland – HS Doc. No. 1500.7220449.04050 – 2015 – 06
1. Safety
DANGER!
Failure to comply with these instructions may result in material damage
or pose a danger to patients or users.
WARNING!
These warnings must absolutely be complied with to guarantee
safe operation of the device and to avoid any danger to users and
to patients.
NOTE!
Important information: please read carefully.
1.1 Areas of application of the device
The device is intended for use in doctor's practices, hospitals and optometrists' and
opticians' premises.
1.2 Ambient conditions
Transport:
Temperature
Air pressure
Relative humidity
from
from
from
−40°C
500 hPa
10%
to
to
to
+70°C
1060 hPa
95%
Storage:
Temperature
Air pressure
Relative humidity
from
from
from
−10°C
700 hPa
10%
to
to
to
+55°C
1060 hPa
95%
Use:
Temperature
Air pressure
Relative humidity
from
from
from
+10°C
800 hPa
30%
to
to
to
+35°C
1060 hPa
90%
1.3 Shipment and unpacking
•
Before you unpack the device, check whether the packaging shows traces of in-
correct handling or damage. If this is the case, notify the transport company that
has delivered the goods to you. Unpack the device together with a representative
of the transport company. Prepare a report for any possibly damaged parts. This
report must be signed by you and by the representative of the transport company.
•
Leave the device in the packaging for a few hours before unpacking it (conden-
sation).
•
Check the device for damage after it is unpacked. Return defective devices in the
appropriate packaging.
•
Store packaging material carefully, so that it can be used for possible returns or
when moving.
•
Theslitlampandheadrestmustbeinstalledonanelectricallyinsulated,fire-
proof table top.
•
Therailcovers(a)preventtheslitlampfromtilting.
•
Check: Are the connection parts of the accessories in the correct position (screw
connections,quick-releasefasteners)?
(a)
1.4 Installation warnings
WARNING!
•
Do not modify this equipment without authorization of the manufacturer.
Installation and repairs may only be performed by trained specialists.
Any third-party device must be connected in compliance with the
EN 60601-1 standard.
The device must not be stacked or placed in close proximity to other
electronic devices.
•
•
1.5 Operation, environment
DANGER!
Never use the device in potentially explosive environments where vola-
tile solvents (alcohol, petrol, etc.) and flammable anaesthetics are in
use.
WARNING!
•The image in the ocular is critical for diagnosing a patient; the images
taken here are only for documentation purposes!
•To avoid the risk of an electric shock, this device must be connected
up to the mains with a ground connection when using power supplies
assigned to protection class I.
•The device must be switched off after every use. Otherwise there is a
risk of overheating when a protective dust cover is employed.
NOTE!
Thisdevicemustonlybeoperatedbyqualifiedandtrainedpersonnel.
The user is responsible for such training.
01-IFU_BX900-7220449-04050_eng.indd 4
29.06.2015 10:30:03