Haag-Streit BX 900 Instructions For Use Manual - page 6
6
DEUTSCH
ENGLISH
FRANÇAIS
ITALIANO
ESPAÑOL
NEDERLANDS
PORTUGUÊS
SVENSKA
DEUTSCH
ENGLISH
FRANÇAIS
ITALIANO
ESPAÑOL
NEDERLANDS
PORTUGUÊS
SVENSKA
© HAAG-STREIT AG, 3098 Koeniz, Switzerland – HS Doc. No. 1500.7220449.04050 – 2015 – 06
Not protected from foreign
bodies
HS reference number
Serial number
On (Power)
Off (Power)
Background illumination
Slit lamp illumination
Protection from penetration
of water & foreign bodies
N
1
N
2
Illumination control from
another manufacturer
AfterturningofftheFU01flash
unit, wait at least 15 seconds
beforetheflashcableisre-
moved.
AfterturningofftheFU01flash
unit, wait at least 15 seconds
before the slide is opened
2. Introduction
The slit lamp comprises an illumination part and a binocular microscope. The entire
device can be moved in front of the eyes using the instrument base. The illumination
offers a range of setting possibilities for making the practically invisible areas of the
eye visible. There is also a range of accessories available for the slit lamp to allow
special diagnosis possibilities in addition to the general examinations.
2.1 Overview
1. LED illumination unit upper part
2. Leverforgreyfilterandredremov-
alfilter
3. Scale for angled position of the slit
image(5°increments)
4. Illumination mirror
5. Magnificationchanger
6. Mounting screw for the stereo mi-
croscope
7. LED periphery or background illumi-
nation with swivel bracket
8. Illumination unit / microscope an-
gle scale
9. Illumination arm locking screw
10. Microscope arm locking screw
11. Slit width setting screw
12. Weight compensation screw
13. Trade mark BX 900®
14. Slit length / diaphragm scale
15. Slitlength,slitrotation,bluefilter
andfixationstarcontrol,knobfor
rotating the slit
16. Cover screw for accessories pin
17. Bayonet connector for accessories
18. Stereo microscope with eyepieces
19. Breath shield
20. Fastening pin for breath shield
21. Threadforfixingthetonometer
22. Centering screw
23. Inclination angle latch 0°-20°
24. Joy stick base locking screw
25. Axle
26. Rail cover
27. Control lever
28. Slide plate
2.2 Photo components
29. Flashcable(withtubeandflash
tubeconnection)
30. Filter wheel for periphery or back-
groundillumination(flash)
31. Optical light guide, branched
32. Pivoting mirror
33. Rotating knob for diaphragm
pre-selection
34. Rotating knob for diaphragm ac-
tuation
35. Flash unit FU 01
36. Flash tube housing
37. Flash tube
38. Lens barrel
39. Camera housing
40. Camera cable
41. Ocular with double cross hairs
42. Mirror and diaphragm component
43. Cable trigger key for mirror/dia-
phragm component
44. Trigger key with cable
01-IFU_BX900-7220449-04050_eng.indd 6
29.06.2015 10:30:08