Hadex Megapixel IP Camera User Manual

Summary of Megapixel IP Camera

  • Page 1

    Megapixel ip camera user manual v2.0.0 megapixel ip camera user manual 2013.9.16 v2.0.0 megapixel ip camera user manual v2.0.0 introduction productions are embedded system software and 38 special high definition ip camera modules, own compression, video data processing functions, are formed by video...

  • Page 2

    Megapixel ip camera user manual v2.0.0  support osd.  support client remote monitor software.  support platform.  support mobile monitor.  support cross service. Our suggestions to customer pc basic configuration as follow: cpu four core 3.0ghz, 4g memory, 512 m independent video memory, 2.1 au...

  • Page 3

    Megapixel ip camera user manual v2.0.0 4.2.5 link down capture................................................................................................. 29 4.2.6 schedule record.................................................................................................... 29 4.3 storage ...

  • Page 4

    Megapixel ip camera user manual v2.0.0 2 1 ch audio input(level: 2vp-p, impedance: 1kΩ) , sound pickup supported 1 ch audio output (impedance:16Ω,power output : 30mw), audio interface headphone connection or amplifier supported standard aac encoding and decoding, audio process two-way voice talkback...

  • Page 5

    Megapixel ip camera user manual v2.0.0 4 figure1.2 enter “cmd” fiure1.3 enter “ping 192.168.0.123 –t” megapixel ip camera user manual v2.0.0 5 figure1.4 network is open figure 1.5 network is not open 1.4 controls installation after connected device and finished configuration network parameter, conne...

  • Page 6

    Megapixel ip camera user manual v2.0.0 6 figure 1.6 security warning b. Then come out the message says that: “please install the plug!”. Figure 1.7 please install the plug c. After that, you will see the interface of controls’ installation, of course, different browser version has different interfac...

  • Page 7

    Megapixel ip camera user manual v2.0.0 8 figure 1.10 the interface of video browsing the video browsing interface is made up of three parts: the function button located at the top of the zone, the video window located at the lower left and the ptz control panel area located at the lower right. A. Th...

  • Page 8

    Megapixel ip camera user manual v2.0.0 10 figure 1.12 preset related operations add preset: the preset number range from 1 to 255, first turn lens and enter preset number, click the button of “+”, then add preset successfully. The preset number from 1 to 64 can be deleted or called, 65 to 255 can no...

  • Page 9

    Megapixel ip camera user manual v2.0.0 12 address. The gateway and ip address must in the same network segment. Dns server address is the host ip address running in the domain server, which provide by network operators. When you don’t know how to set it, you can search in the internet, or you can en...

  • Page 10

    Megapixel ip camera user manual v2.0.0 14 figure 2.6 click ap, automatically fill information the interface of wifi config as figure 2.7, when use the function of ap search, double-clicking can auto add the configuration of wifi parameter, but if the ap you added enable encrypt, you need enter the r...

  • Page 11

    Megapixel ip camera user manual v2.0.0 16 the username, password and domain name. Then enable ddns, select the ddns server as “3322.Org”. If your domain name is “test.3322.Org”, please enter “test” in the ddns domain, and the user name and password is the username and password that applied in the ww...

  • Page 12

    Megapixel ip camera user manual v2.0.0 18 figure 2.14 smtp account setup 2.9 media stream setup media stream setup is as figure 2.15. Access protocol: while the device is in public network, tcp is a better choose, while the device and the user are the same network then udp is a better choose. The de...

  • Page 13

    Megapixel ip camera user manual v2.0.0 20 3 media 3.1 video capture video capture includes two sides: ircut setting and video capture setup. Ircut has five work modes: active mode, day and night, passive, manual and inverse passive. The working principle of active mode is that it use module to set c...

  • Page 14

    Megapixel ip camera user manual v2.0.0 22 the quietly of video. When the network bandwidth is stable, you can choose constants bit rate (called cbr for short). The third method is called cvbr, it give priority to cbr and compatible with vbr. So you should choose control method according to the netwo...

  • Page 15

    Megapixel ip camera user manual v2.0.0 24 figure 3.8 media status megapixel ip camera user manual v2.0.0 25 4 storage 4.1 storage manage 4.1.1 uninstall of storage device “uninstall” means remove the storage from the device with a safe way, in order to prevent data been destruct. Choose the storage ...

  • Page 16

    Megapixel ip camera user manual v2.0.0 26 lose and can’t restoration, so if there is some important date you’d better transfer it to other place. Figure 4.3 if ensure to format storage device? 4.2 storage setting 4.2.1 basic setup the basic setup of storage setting is as figure 4.4. Figure 4.4 basic...

  • Page 17

    Megapixel ip camera user manual v2.0.0 28 figure 4.6 motion alarm snap motion alarm snap: only when it enables others parameters can be changed. Pre-capture time: before start snap, camera saves date in temporary buffer. Once start snap, then call those dates, this is the function of pre-capture. Th...

  • Page 18

    Megapixel ip camera user manual v2.0.0 30 figure4.10 schedule record enable: only when it enables others parameters can be changed. Video stream: there are three choices “main stream”, “sub stream” and “snap picture”. When you choose “main stream” or “sub stream”, you will get record file, or you wi...

  • Page 19

    Megapixel ip camera user manual v2.0.0 32 5 alarm 5.1 motion alarm the setting of motion alarm is as figure 5.1. Figure 5.1 motion alarm motion alarm: only when it enables others parameters can be changed. Sensitivity: the sensitivity of motion detection. The value is larger and more easily to creat...

  • Page 20

    Megapixel ip camera user manual v2.0.0 34 parameters for it. Figure 5.5 video lost alarm 5.3 storage full alarm if the camera with storage device, then you can enable “storage full alarm”, it will alarm when the usage of the storage more than a value. In this page, “alarm rate” is the usage rate of ...

  • Page 21

    Megapixel ip camera user manual v2.0.0 36 administrator without any limit; operator can change configuration information but can’t view device status information; viewer has instead permission of operator. User status is to set the effectiveness of user, when enable, the added user can login success...

  • Page 22

    Megapixel ip camera user manual v2.0.0 38 figure 6.7 system log setup 6.4 log file manage device supports query, download and delete function of log file. Clicking the button of “query” can query all log file in this device, and will show in the above list. Select one or more log file, click the “do...

  • Page 23

    Megapixel ip camera user manual v2.0.0 40 figure 6.13 system update t38c-onvif t38d-onvif firmware_ts38cd-onvif-v2.4.6.6_20130725180316.Bin t38r-onvif t38s-onvif firmware_ts38rs-onvif-v2.4.6.6_20130725175914.Bin t38f006-onivif t38g006-onivif firmware_ts38abfg006-onvif-v2.4.6.6_20130725175513.Bin fig...

  • Page 24

    Megapixel ip camera user manual v2.0.0 42 figure 6.19 device language setting 6.8 version info in this interface you can view kernel version, file system version, serial number and web control version. Figure6.20 system info megapixel ip camera user manual v2.0.0 43 7 playback when device connects w...

  • Page 25

    Megapixel ip camera user manual v2.0.0 44 schedule and alarm. Media type includes audio and video, only video and picture. The type of “audio and video” with audio date when it record, if the device with audio input, it will with sound when playback. Stream type include main stream and sub stream. W...

  • Page 26

    Megapixel ip camera user manual v2.0.0 46 click the button of “play”, picture will show in the playback window. Double click the window, picture will display in full screen. If select more than one picture, you can switch pictures by buttons of “previous” and “next”, button switches just limit in th...

  • Page 27

    Megapixel ip camera user manual v2.0.0 48 figure 7.13 download complete 7.4 the delete of file when you don’t need a file, you can delete it. Select the file that need deleted, click the button of “delete”, then come out the dialog as figure 7.14, click “ok”, the selected file will be deleted. Once ...