Hadex Megapixel IP Camera User Manual - page 18
Megapixel IP Camera User manual V2.0.0
30
Figure4.10 schedule record
Enable: only when it enables others parameters can be changed.
Video stream: there are three choices “Main Stream”, “Sub Stream” and “snap
picture”. When you choose “Main Stream” or “Sub Stream”, you will get record file,
or you will got picture.
Video format: according the different video stream, there is different video format.
Record type: “Audio and Video” means the record file you will get with sound, so
video without sound. But this not means that you choose “Audio and video”, you will
get record file with sound. The premise is that your camera with the function of audio
and there is audio input, moreover, the camera has enable the function of audio
encode.
Capture Interval: when the “Video stream” is “snap picture”, this option can set. It is
to set how long device snaps a picture.
Upload to FTP: when the “Video stream” is “snap picture”, this option can set. When
you have right configured parameter of FTP, enable this function, when end record,
camera will send this record file to server.
Send to Email: when the “Video stream” is “snap picture”, this option can set. When
you have right configured parameter of SMTP, enable this function, when end record,
camera will send this record to the mailbox.
Record time setting: to set the time of schedule record (snap). It consists of date, start
time and end time. After set a record time, click the button of “Add”, then this record
time will show in below list. A camera can add twenty-four record time most. Once
enable schedule record, during the setting time, device will record (snap) according to
the configuration.
Notice:
Megapixel IP Camera User manual V2.0.0
31
1. The record or snap is the function of device that does not depend on network. So,
once you enable record or snap, and set parameter in right way, when the device
connects with power, it will record or snap according to the configuration.
2. If there is no storage device, camera can’t record.
3. If there is no storage device but enable snap picture, and enable “Upload to FTP”
or “Send to Email”, if the configuration of FTP or SMTP is right, camera can snap
picture and send to server or the mailbox.
4.3 Storage device information
In the interface of storage device information, detail shows device status, total size,
used size, free size and used percentage for every storage device.
Figure 4.11 the information of storage device