Hadex Megapixel IP Camera User Manual - page 11
Megapixel IP Camera User manual V2.0.0
16
the username, password and domain name.
Then enable DDNS, select the DDNS Server as “3322.org”. If your domain name is
“test.3322.org”, please enter “test” in the DDNS Domain, and the User Name and
Password is the username and password that applied in the
www.3322.org
. Set the
Refresh Time as 1 minute, then DDNS will work after 1 minute.
Last you can access the device by domain name.
Figure 2.11 DDNS Setup
2.6 UPNP Setup
UPNP setup is as Figure 2.12.
Usually, when device accesses the internet, if not in an independent network, it need
port mapping. That is to say, we need map a device’s media access port, PTZ control
port and web access port in router, after that we can access this device in the internet.
In my mind, these operations are very complex. But when enable UPNP, just enter the
IP address of router add this device’s web access port, you can access this device in
the internet.
Figure 2.12 UPNP Setup
2.7 FTP Account Setup
FTP account setup is as Figure 2.13.
First a FTP server is indeed. Then apply a FTP account from the FTP server
(username and password). And you must create four directory as “alarm”, “log”, “set”,
“update” or other directory name, also you can enter “./” then the entire document will
be save in the root of the FTP server.
The default port of FTP is 21. The information of the interface must be correct to
make sure the FTP function run correct.
Megapixel IP Camera User manual V2.0.0
17
Alarm upload, log backup, configure backup and update can be uploaded by FTP.
Figure 2.13 FTP Account Setup
2.8 SMTP Account Setup
SMTP account setup is as figure 2.14.
This function not only support internal mail transfer but also internet.
SMTP Server Address is refers the IP address of mail server, such as QQ is
smtp.qq.com, NetEase,Inc is smtp.163.com.
SMTP Server Port usually set as the default port 25.
SSL/TLS connect is a mode to verity security. When SMTP server enables this
function here must enable, otherwise the same.
Mail Account is a user or to say an address in SMTP servers. You must enter a correct
account and the correct password.
Show Account is the same as Mail account.
User Mail Address is the mail address that you want to receive the mail. SMTP Server
Address and User Mail Address, if former is internal the latter must internal,
otherwise if former is internet the latter must internet too. CC Mail Address is means
when the device set mail to User Mail Address, it will copy the mail and set to CC
Mail Address. CC Mail Address has the same rule with User Mail Address.
Mail Subject is the subject of the mail, you can write it by yourself.