HAI OmniTouch 10p User Manual - Front View Description

Front View Description 

Component 

Description 

Display 

Displays the OmniTouch 10p Touchscreen application.  It is touch 

sensitive and responds to the stylus or a finger 

Navigation pad 

Using HAI Automation Studio, the function for each position of the 

Navigate pad can be programmed to perform a task. 

Function buttons 

Using HAI Automation Studio, each Function button can be 

programmed to perform any task. 

Status LEDs 

Indicates the status of the wireless network and battery charging 

power. 

Wireless LAN LED (top) 

• 

Off: Wireless LAN Disabled / No HDD Access 

• 

Solid green: Wireless LAN Activated / Transmission in 

progress 

• 

Blinking orange: accessing HDD 

Power LED (bottom) 

• 

Off: power is off 

• 

Solid green: battery is charged (30%-100%) in power mode.  

In power off mode, battery is charging when AC is connected. 

• 

Blinking green: AC power is connected and battery is 

charging. 

• 

Solid orange: power is on and battery is low (10%-30%). 

• 

Blinking orange: power is on and battery is very low (less 

than 10%).  The OmniTouch 10p will auto-suspend when the 

battery reaches 3% battery charge. 

Microphone 

Enables you to speak into the OmniTouch 10p (for future use). 

4