HAI OmniTouch 10p User Manual - Power Led Status
Power LED Status
LED
Description
Off Power
is
off
Solid green
Power is on and battery is charged.
or
Power is off, AC power is connected, and battery is charging.
Blinking green
Power is on, AC power is connected, and battery is charging.
Solid orange
Power is on and battery charge is low (10%-30%).
Blinking orange
Power is on and battery charge is very low (less than 10%).
The OmniTouch 10p will auto-suspend when the battery reaches
3% battery charge.
Checking the Battery Status
If the battery level becomes low in the course of normal use, a status icon
appears on the device
screen indicating low or very low battery status. In both cases recharge your device as soon as possible.
Turning On the OmniTouch 10p for the First Time
After you have initially charged the OmniTouch 10p for about 2 hours, it is ready to be used. When you
turn on the OmniTouch 10p for the first time, you should calibrate the display, setup the wireless
network, and set up the system time zone, date, and time before connecting to the HAI controller.
NOTE:
The OmniTouch 10p ships with a protective plastic film. You may remove this if desired by peeling from
one corner. The screen will be susceptible to scratching without the film.
13