HAI OmniTouch 10p User Manual - page 23
Manual is about: 10” Portable Color Touchscreen
of
44
Calibrating the OmniTouch 10p Screen
The PenMount Control Panel is used to calibrate the OmniTouch 10p screen as follows:
1. Using the stylus, tap the PenMount Control Panel icon in the system tray.
2. Tap Control Panel to open the PenMount Control Panel.
3. On the PenMount Control Panel window, tap the Device tab, and then tap “Configure".
4. Tap the Calibrate tab, and then tap “Standard Calibration” or “Advanced Calibration”. The two
calibration screens are shown:
15