HAI OmniTouch 10p User Manual - Opening The Port Covers
Manual is about: 10” Portable Color Touchscreen
of
44
Connecting Devices to the OmniTouch 10p
This section describes how to connect devices to the OmniTouch 10p. You can connect devices directly
to the OmniTouch or connect using the optional docking cradle.
Opening the Port Covers
The port covers protect the ports and connectors from rain, dust (IP53 standard), and other adverse
environmental conditions.
Open the port covers to access the ports.
Ensure that you close the covers tightly after disconnecting cables and connectors.
Connecting USB
The following illustration shows how to connect a USB Type A device to the OmniTouch 10p. The
connector can only go in one way. If it does not go in smoothly, check the orientation and try again.
26