Haier AB092FCBHA User Manual - Trouble Shooting
10
The following are not problems.
Water gurgling
sound
Pop sound
Strange odor
Mists from indoor unit
Automatic airflow mode set
during cooling process
This results from the expansion and
shrinkage of plastic components.
This results from cigarettes or paint
inside the appliance.
This results from excess
moisture in the air after
cooling.
This is designed to prevent frost
accumulation on the heat pump.
The cooling and supply mode will
be reset after desired result is
achieved.
Ha
Ha
Immediate restarting not
recommended
The appliance cannot be
restarted for at least three
minutes after the appliance is
turned off.
A 3min lapse
A slight sound similar to water
gurgling can be produced when the
appliance is turned on and off, or the
compressor started or ceased during
operation period of the appliance.