Haier AB092FCBHA User Manual - Cautions
Operation
If ambient air humidity is high,
water droplets may condense at
the air outlet of the air
conditioner during cooling or
dehumidifying.
Airflow speed change
If the automatic mode is set for cooling, the
airflow speed will decrease gradually as the
room temperature approaches the set point.
Airflow adjustment
During the cooling or dehumidifying
process, it is recommended that the
louver does not remain in the vertical
position to avoid accumulation of
frost at the air outlet.
3
Cautions
If the automatic mode is set for heating, the
compressor will cease and the fan speed will
reduce and then cease as the room temperature
approaches the set point.
Airflow speed will change automatically if the dehumidifying mode is set.
Compensation for power interruption (Applicable accordingly)
If this function is set, the air conditioner will return to the original operating state
after the power supply is interrupted and then resumed.
Setting: When the power supply is connected and the remote control is activated
(excluding timing and air supply modes), repeatedly pressing the Sleep
button 10 times within 5 seconds will activate the compensation status
after the buzzersounds 4 times.
Inactivating: Repeatedly pressing the Sleep button 10 times within 5 seconds will
deactivate the compensation status after the buzzer sounds twice.
Caution: If the power supply is interrupted during the operation of the air conditi-
oner with the compensation function set or the air conditioner is not in
use, the airconditioner should be disconnected from the power source.