IBP MH901ICA Instruction Manual - page 30
58
59
Fehlermeldungen
Cautionary Notes
1.
The unit contains high-precision assemblies. Therefore,
avoid extreme temperatures, humidity, and direct sunlight
Avoid dropping or strongly shocking the main unit, and
protect it from dust.
Fehlermeldung
Ursachen
Korrekturen
EE
Messfehler
Stellen Sie sicher, dass der
L-Stecker fest mit dem
Luftanschluss verbunden ist und
messen Sie erneut in Ruhe. Legen
Sie die Manschette korrekt an und
halten Sie den Arm während der
Messung ruhig. Wenn der Fehler
weiterhin auftritt, geben Sie das
Gerät an Ihren Händler oder
Kundendienst zurück.
E1
Luftkreislaufstör
ung
Stellen Sie sicher, dass der
L-Stecker fest mit dem
Luftanschluss verbunden ist und
messen Sie erneut in Ruhe. Wenn
der Fehler weiterhin auftritt, geben
Sie das Gerät an Ihren Händler
oder Kundendienst zurück.
E2
Der Druck
überschreitet
300 mm Hg
Schalten Sie die Einheit aus und
messen
Sie erneut in Ruhe. Wenn der Fehler
weiterhin auftritt, geben Sie das
Gerät an Ihren Händler oder
Kundendienst zurück.
E3
Datenfehler
Entfernen und setzen Sie die
Batterien wieder ein. Tritt der Fehler
erneut auf, geben Sie das Gerät an
das lokale Vertriebs- oder Service
Center zurück.
Er
Überschreitung
des
Messbereichs
Schalten Sie die Einheit aus und
messen
Sie erneut in Ruhe. Wenn der Fehler
weiterhin auftritt, geben Sie das
Gerät an Ihren Händler oder
Kundendienst zurück.
2. Leaky batteries can damage the unit. Remove the batteries
when the unit is not used for a long time.
3. The unit should not be operated by children so to avoid
hazardous situations.
4. MH901iCA is not field serviceable. You should not use any
tool to open the device nor should you attempt to adjust
anything inside the device. If you have any problems,
please contact the store or the doctor from whom you
purchased MH901iCA or please contact IBP GmbH .
5. For users diagnosed with common arrhythmia (atrial or
ventricular premature beats or atrial fibrillation), diabetes,
poor circulation of blood, kidney problems, or for users
suffered from stroke, or for unconscious users, the device
may have difficulty in determining the proper blood
pressure.
6. Clean the blood pressure monitor body and the cuff
carefully with a slightly damp, soft cloth. Do not press. Do
not wash the cuff or use chemical cleaner on it. Never use
thinner, alcohol or petrol (gasoline) as cleaner.
7. To stop inflation at any time, press the
key, and the air
in the cuff will be rapidly exhausted.
8. Once the inflation reaches 300 mmHg, the unit will start
deflating rapidly for safety reason.
Notes:
Batteries are hazardous waste.
Do not dispose them together with the household
garbage.