Icom IC-A110EURO Instruction Manual - Memory Programming
8
4
MEMORY PROGRAMMING
D
Setting lockout channels
In order to speed up the scan periods, you can set memory
channels you don’t wish to be scanned as lockout channels.
q
Push [V/M] to select the Memory mode, if necessary.
• “
” appears.
w
Rotate [DIAL] to select a memory channel to set as a
lockout channel.
e
Hold down [SCAN] for 5 sec-
onds to toggle the lockout
setting ON or OFF.
• “LOCK OUT” appears when
the channel is set as a lockout
channel.
The transceiver has 99 memory channels for storage of
often-used frequencies.
q
Push [V/M] to select the VFO
mode, if necessary.
w
Rotate [DIAL] to select the
desired frequency.
• Push [TS](DIAL) one or more
times to use the dial select
function, if desired.
e
Hold down [MW](V/M) for 5
seconds to enter the mem-
ory programming mode.
• “
” and the memory chan
-
nel number appear.
r
Rotate [DIAL] to select the
desired memory channel
number.
t
Hold down [MW](V/M) for 1
second to program the infor-
mation into the channel and
return to the VFO mode.
• To cancel the memory informa
-
tion, hold down [SQL] for 1
second.
MR
MR
MR
BUSY
SKIP
50
NOTE
: The VFO/memory switch [V/M] and the memory
write switch [MW] functions may not be available, depend-
ing on version.
Memory channel 8 is set
as the lockout channel.
■