Icom IC-A110EURO Instruction Manual - Mounting
13
6
CONNECTION AND INSTALLATION
■
Mounting
The universal mounting bracket supplied with your trans-
ceiver allows overhead or dashboard mounting. Please read
the following instructions carefully.
• Mount the transceiver securely with the 4 supplied
screws (M5
×
20) to a surface which is more than 10
mm thick and can support more than 5 kg.
• Mount the transceiver so that the face of the transceiver
is at 90˚ to your line of sight when operating.
IMPORTANT!
Detailed installation notes for Icom mobile transceivers to
be fitted into vehicles are available. Contact your Icom
dealer or distributor.
■
Supplied accessories
q
Microphone ................................................................................. 1
w
Microphone hanger and screw set ........................................ 1 set
e
Microphone cable ........................................................................ 1
r
DC power cable (OPC-1091) ...................................................... 1
t
Mounting bracket......................................................................... 1
y
Bracket bolts ............................................................................... 4
u
Mounting screws (M5
×
12) ......................................................... 4
i
Self-tapping screws (M5
×
20) .................................................... 4
o
Flat washers ................................................................................ 4
!0
Spring washers ........................................................................... 4
!1
Nuts ............................................................................................. 4
!2
Fuses (10 A) ............................................................................... 2
q
w
e
r
t
y
u
i
o
!0
!1
!2
Flat washer
Spring washer
When using
self-tapping screws