Icom IC-A110EURO Instruction Manual - Other Functions
5
OTHER FUNCTIONS
10
■
Initial Set mode
The Initial Set mode is accessed at Power ON, and allows
you to set seldom-changed settings. In this way you can the
“customize” the transceiver operations to suit your
preferences and operating style.
D
Entering Initial Set mode
q
While holding down [V/M] + [TS](DIAL), push [POWER] to
turn ON the power.
• The transceiver enters the Initial Set mode and “MN”, “BP”, “ST”
or “PR” (p. 11) appears on the display.
w
Push [TS](DIAL) to select the
desired item as described
below and to the right.
e
Rotate [DIAL] to select the de-
sired option or setting.
r
Push [SCAN] to exit the Initial
Set mode and return to the
previous operating mode.
D
Memory names
This item allows you to display a memory name instead of
the frequency.
• When a memory channel has not been programmed with a name,
the frequency appears instead.
D
Beep tones ON/OFF
Confirmation beep tones normally
sound when you push a key.
These can be turned ON or OFF,
as you prefer.
D
Side tones ON/OFF
When using an optional headset
such as those from the David
Clark Co. using an adapter, the
transceiver outputs your transmit-
ted voice to the headset for moni-
toring.
•
O p t i o n a l
O P C - 8 7 1
H E A D S E T
ADAPTER is required.