Icom IC-A110EURO Instruction Manual - page 2
i
FOREWORD
READ ALL INSTRUCTIONS
carefully and completely
before using the transceiver.
SAVE THIS INSTRUCTION MANUAL
—
This in-
struction manual contains important operating instructions
for the IC-A110EURO.
EXPLICIT DEFINITIONS
The explicit definitions below apply to this instruction man-
ual.
CAUTIONS
R
WARNING! NEVER
operate the transceiver with a
headset or other audio accessories at high volume levels.
Hearing experts advise against continuous high volume op-
eration. If you experience a ringing in your ears, reduce the
volume level or discontinue use.
NEVER
connect
the transceiver
to an AC
outlet or to a
power source of
more than 32 V DC
. Such a connection will
damage the transceiver.
NEVER
connect the transceiver to a power source that is
DC fused at more than 5 A. Accidental reverse connection
will be protected by this fuse, higher fuse values will not give
any protection against such accidents and the transceiver
will be ruined.
DO NOT
operate the transceiver near unshielded electri-
cal blasting caps or in an explosive atmosphere.
DO NOT
connect the transceiver to a power source using
reverse polarity. This connection will not only blow fuses but
also may damage the transceiver.
DO NOT
place unit in a non-secure place to avoid inad-
vertent use by children.
WORD
DEFINITION
R
WARNING!
Personal injury, fire hazard or electric shock
may occur.
CAUTION
Equipment damage may occur.
NOTE
If disregarded, inconvenience only. No risk
of personal injury, fire or electric shock.
Icom, Icom Inc. and Icom logo are registered trademarks of Icom In-
corporated (Japan) in Japan, the United States, the United King-
dom, Germany, France, Spain, Russia and/or other countries.