Icom IC-A110EURO Instruction Manual - Cloning
14
7
CLONING
D
Data cloning
Cloning allows you to quickly and easily
transfer the programmed contents from one transceiver to
another transceiver or data from a PC to a transceiver using
the optional CS-A110EURO cloning software.
D
Transceiver to transceiver cloning
q
Connect the OPC-591
CLONING CABLE
with adapter plugs to
the [MIC] jack of the master and sub-transceivers.
• The master transceiver is used to send data to the sub-transceiver.
w
While holding down [
Y
] + [
Z
] + [V/M], push [POWER] to
enter cloning mode (master transceiver only —power ON
only for sub-transceiver).
• “CLONE” appears and the
transceivers enter the clone
standby mode.
e
Push [POWER] on the master
transceiver.
• “CL-OUT” appears in the
master transceiver’s display.
• “CL-IN” appears automati
-
cally in the sub-transceiver’s
display.
e
When cloning is finished, turn
power OFF, then ON again to
exit the cloning mode.
D
Cloning using PC
Data can be cloned to and from a PC using the optional CS-
A110EURO
CLONING SOFTWARE
and the optional OPC-478
CLON-
ING CABLE
+
OPC-592
CLONING CABLE ADAPTER
. Consult the CS-
A110EURO
CLONING SOFTWARE
HELP message for details.
D
Cloning error
When the display to the right ap-
pears, a cloning error has oc-
curred.
• In this case, both transceivers automatically return to the
clone standby mode and cloning must be repeated.
]