Operating guide operating guide for ic-f3262dt/ds ic-f4262dt/ds biis 1200 system/ idas™ dpmr™ operation.
I thank you for purchasing this icom transceiver. The binary interchange of information and signaling (biis) 1200 and digital private mobile radio (dpmr) system func- tions are built into your ic-f3262dt/ds or ic-f4262dt/ds transceiver. Read all instructions carefully and completely before using the...
Table of contents ii important .......................................................................... I table of contents ........................................................ Ii 1 preparation............................................................1–2 ■ programmable function keys ...........
1 1 preparation ■ programmable function keys the following functions can be assigned to [emr], [side1], [side2], [side3], [p0], [p1], [p2] and [p3] programmable function keys. Consult your icom dealer or system operator for details con- cerning your transceiver’s programmed keys and their func- tion...
D for both biis 1200 and dpmr operations the following key functions are useful for biis 1200 and dpmr operations. Status up, status down “stup” “stdn” ➥ push to select a status message. ➥ when the automatic scroll function is activated, push to cancel it, if desired. ➥ when an sdm that includes mor...
3 2 biis 1200 operation ■ biis 1200 operation the binary interchange of information and signalling (biis) 1200 standard is the best choice to add a data service to an existing system. It enables digital communications, signalling and message exchanges with analog transceivers. The biis system provid...
4 2 biis 1200 operation 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 d receiving a group call when a group call is received: q • rings sound. • “ ” appears and the mute is released. • “ ” appears or blinks, depending on the preprogrammed set- tings. • the group id (or name) and the calling station’s id (o...
5 2 biis 1200 operation ■ receiving a call (continued) d receiving a status message when a status message is received: q • rings sound. • the calling station’s id (or name) and the status message blink. Push w [moni (audi)] to return to the stand-by mode. Note: when the display mode is one line if t...
6 2 biis 1200 operation 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 d displaying a received call record — queue channel mode the transceiver memorizes up to three calling station’s ids. When the fourth call is received, the oldest call record will be removed, and the last received call will be added. Whe...
7 2 biis 1200 operation ■ transmitting a call d general • editing an id if the transceiver has a key assigned to the tx code enter function, you can edit an id within the allowable digits. Push q [tx code enter] to enter the id edit mode. • the digit to be edited blinks. W push [tx code enter] to se...
8 2 biis 1200 operation 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 d transmitting a status message you can send a preprogrammed status message to an indi- vidual station or to group stations. There are 24 status messages that can be sent, and status 22 and 24 messages have designated meanings. Status 22...
9 2 biis 1200 operation ■ transmitting a call (continued) d transmitting an sdm you can send a preprogrammed sdm to an individual station or to group stations. The transceiver has eight memories to store messages. Push q [biis button] to enter the call code memory mode. • “ ” appears. • the preprogr...
10 2 biis 1200 operation 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 • usable characters note: messages can be edited also using a pc editing program. Ask your dealer for details. D transmitting an emergency call if an msk channel is used as the emergency channel, the transceiver can access the biis emer...
11 2 biis 1200 operation ■ position data transmission only transceiver versions with the gps unit installed can transmit position data. The longitude and latitude position data can be automatically transmitted when: • when status 24 (gps request) is received. • when [ptt] is released. - set the ‘sen...
12 2 biis 1200 operation 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 ■ biis ani your own id can be transmitted each time [ptt] is pushed (log-in) or released (log-off) during individual or group call communications. By receiving an ani, the communication log can be recorded when using a pc dispatch appli...
■ dpmr operation the ic-f3262dt/ic-f3262ds and ic-f4262dt/ic-f4262ds provide digital private mobile radio (dpmr) operation that meets the 6.25 khz bandwidth requirements for narrow band operation. This increases the efficiency of channel allocation and use of the spectrum. Note: during dpmr operatio...
14 3 dpmr operation 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 d receiving a group call when a group call is received: q • rings sound. • “ ” appears and the mute is released. • “ ” appears or blinks, depending on the preprogrammed set- tings. • the talkgroup id (or name) and the calling station’s id (o...
15 3 dpmr operation ■ receiving a call (continued) d receiving an sdm when an sdm is received: q • rings sound. • the calling station’s id (or name) and the sdm are displayed. Note: when the sdm includes more than 12 charac- ters, it automatically scrolls. • push [status up] or [status down] to stop...
16 3 dpmr operation 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 d receiving an ambience listening call if an individual call with an ambience listening command is received from a specified station, the transceiver will auto- matically transmit its microphone audio. Note: if the transceiver receives an am...
17 3 dpmr operation ■ receiving a call (continued) d displaying a received call log entry depending on the preprogrammed setting, the transceiver stores up to 10 call log entries. Individual voice, status and sdm call log entries are stored. When an 11th call is re- ceived, the oldest call log entry...
18 3 dpmr operation 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 ■ transmitting a call dpmr operation allows you to make a call to a specific sta- tion (individual call) or to a particular group (talkgroup call). Other digital mode transceivers on the channel will not re- ceive a call that does not match ...
19 3 dpmr operation ■ transmitting a call (continued) d transmitting a voice call note: if you want to make a call to the preprogrammed id, skip step q and w and directly go to step e. Push q [dpmr button] to enter the id selection mode. • the preprogrammed id is displayed. W push [ch up] or [ch dow...
20 3 dpmr operation 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 d transmitting a status message you can send a preprogrammed status message to an indi- vidual station or to group stations. There are 32 status messages that can be sent. Push q [dpmr button] to enter the id selection mode. • the preprogram...
21 3 dpmr operation ■ transmitting a call (continued) d transmitting an sdm you can send a preprogrammed sdm to an individual station or to group stations. The transceiver has 10 memories to store messages. Push q [dpmr button] to enter the id selection mode. • the preprogrammed id is displayed. W p...
22 3 3 dpmr operation 4 5 6 7 8 9 10 11 12 13 14 15 16 1 2 22 3 d direct message input (only 10-key version) while displaying an sdm, you can edit or change the mes- sage. Push q [dpmr button] twice to enter the application selec- tion mode. • “ status” is displayed. Push w [ch up] or [ch down] to s...
■ transmitting a call (continued) d transmitting an emergency call if a digital channel is used as the emergency channel, the transceiver can access the dpmr emergency mode. If your transceiver is programmed for silent operation, you can transmit emergency calls without the beep sounding or the disp...
24 3 4 5 6 7 8 9 10 11 12 13 14 15 16 1 2 3 dpmr operation 24 ■ transmitting a command the following individual calls allow you to send special com- mands. These calls will function if you are designated as a specific station. Ask your dealer for details. D transmitting an ambience listening call an...
■ transmitting a command (continued) d transmitting a kill call a kill call allows you to send a command that will disable the target station. Push q [dpmr button] to enter the id selection mode. • the preprogrammed id is displayed. W push [ch up] or [ch down] to select a desired individual id. E pu...
26 3 dpmr operation 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 ■ position data transmission only transceiver versions with the gps unit installed can transmit position data. The longitude and latitude position data can be automatically transmitted when: • when the gps request status message is received....
27 3 dpmr operation ■ status message transmission status messages can be automatically transmitted: • when the transceiver is turned on or off. - select a status message to be transmitted in the ‘power on status’ or ‘power off status’ item, respectively. - select a target station id in the ‘power st...
Memo 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16.
1-1-32 kamiminami, hirano-ku, osaka 547-0003, japan a-7035-2eu © 2012 icom inc..