Icom IC-FR3000 Series Sales Handbook - page 12
Panel Description
⓰
ANI CLEAR SWITCH [ANI CLR]
ANI CLEAR SWITCH [ANI CLR]
ANI CLEAR SWITCH [ANI CLR]
ANI CLEAR SWITCH [ANI CLR]
Push for 1 sec. to clear the received ANI ID indication
on the display and returns to original indication.
▒ NOTE:
NOTE:
NOTE:
NOTE: This switch is no function available for some
▒ versions.
⓱
DEALER
DEALER
DEALER
DEALER----PROGRAMMABLE SWITCH [PROG]
PROGRAMMABLE SWITCH [PROG]
PROGRAMMABLE SWITCH [PROG]
PROGRAMMABLE SWITCH [PROG]
Toggles the pre-programmed function ON or OFF
when pushed.
⓲
PROGRAMMED FUNCTION INDICATOR
PROGRAMMED FUNCTION INDICATOR
PROGRAMMED FUNCTION INDICATOR
PROGRAMMED FUNCTION INDICATOR
Lights green while pre-programmed function is
activated.
⓳
DC INDICATOR
DC INDICATOR
DC INDICATOR
DC INDICATOR
Lights green when in DC operation.
❶
MEMORY CHANNEL INDICATOR
MEMORY CHANNEL INDICATOR
MEMORY CHANNEL INDICATOR
MEMORY CHANNEL INDICATOR
Shows the selected memory channel.
❷
TRANSMIT POWER INDICATOR
TRANSMIT POWER INDICATOR
TRANSMIT POWER INDICATOR
TRANSMIT POWER INDICATOR
Shows the output power level.
❸
AUDIBLE INDICATOR
AUDIBLE INDICATOR
AUDIBLE INDICATOR
AUDIBLE INDICATOR
“@” appears in an audible condition, disappears in
an inaudible condition. (When an audible condition,
audio mute is cancelled.)
❹
ALPHANUMERIC INDICATORS
ALPHANUMERIC INDICATORS
ALPHANUMERIC INDICATORS
ALPHANUMERIC INDICATORS
Shows the variety text or code information.
Function display
Function display
Function display
Function display
Rear panel
Rear panel
Rear panel
Rear panel
12
❶
TRANSMIT ANTENNA CONNECTOR [TX/TX•RX]
TRANSMIT ANTENNA CONNECTOR [TX/TX•RX]
TRANSMIT ANTENNA CONNECTOR [TX/TX•RX]
TRANSMIT ANTENNA CONNECTOR [TX/TX•RX]
➥
Connects a transmit antenna (impedance: 50 Ω)
and outputs transmit signals.
➥
When installing an optional internal duplexer
(supplied by third party), this connects the
transmit receive to an antenna.
❷
EXTERNAL SPEAKER CONNECTOR [EXT SP]
EXTERNAL SPEAKER CONNECTOR [EXT SP]
EXTERNAL SPEAKER CONNECTOR [EXT SP]
EXTERNAL SPEAKER CONNECTOR [EXT SP]
Accepts a 4 Ω external speaker.
❸
REMOTE CONNECTOR [REMOTE]
REMOTE CONNECTOR [REMOTE]
REMOTE CONNECTOR [REMOTE]
REMOTE CONNECTOR [REMOTE]
Connects to the remote controller.
• See p. 16 for remote connector information.
❹
ACCESSORY CONNECTOR [ACC]
ACCESSORY CONNECTOR [ACC]
ACCESSORY CONNECTOR [ACC]
ACCESSORY CONNECTOR [ACC]
Connects to the remote controller.
• See pgs. 15 for accessory connector information.
❺
RECEIVE ANTENNA CONNECTOR [RX]
RECEIVE ANTENNA CONNECTOR [RX]
RECEIVE ANTENNA CONNECTOR [RX]
RECEIVE ANTENNA CONNECTOR [RX]
➥
Connects a receive antenna (impedance: 50 Ω)
and inputs receiving signals.
➥
When installing an internal duplexer (supplied by
third party), do not use this connector.
❻
AC POWER SOCKET [AC]
AC POWER SOCKET [AC]
AC POWER SOCKET [AC]
AC POWER SOCKET [AC]
Connects the supplied AC power cable to a domestic
AC outlet.
❼
GROUND TERMINAL [GND]
GROUND TERMINAL [GND]
GROUND TERMINAL [GND]
GROUND TERMINAL [GND]
Ground the repeater through this terminal to prevent
electric shocks, TVI, BCI and other problems.
❽
DC POWER INPUT TERMINALS [BATTERY]
DC POWER INPUT TERMINALS [BATTERY]
DC POWER INPUT TERMINALS [BATTERY]
DC POWER INPUT TERMINALS [BATTERY]
Connects the 12 V storage battery for the repeater
backup when the AC power is interrupted. These
terminals are also used for DC power operation.
▒ CAUTION: NEVER
CAUTION: NEVER
CAUTION: NEVER
CAUTION: NEVER short the (+) line of the DC power
▒ cable to repeater’s chassis, when connecting DC
▒ power cable to the [BATTERY] terminals. Otherwise,
▒ there is danger of electric shock and/or equipment
▒ damage.