Icom IC-FR3000 Series Sales Handbook - page 14
3-1-2
Display Assign
Display Assign
Display Assign
Display Assign
Display Assign
Dealer programmable key [PROG] can be programmed
for one of several functions (see below).
Programmable Key Assign
Programmable Key Assign
Programmable Key Assign
Programmable Key Assign
•
Opening Text
Opening Text
Opening Text
Opening Text
- This set text appears for 2 sec. when turning the
repeater ON. To turn power ON without text
indication, set this item to blank.
- Up to 16 characters are available.
14
- Usable characters: ! " # $ % & ' ( ) * + - , . / : ; < > = ?
@ [ ] ^ _ ` { | } 0 to 9, A to Z, a to z and space.
•
RF Power Selection
RF Power Selection
RF Power Selection
RF Power Selection
- MR CH individual
MR CH individual
MR CH individual
MR CH individual
Output power keys, [High] and [Low], select power
temporarily. Returns to the previous power when
changing the channel.
---- Override
Override
Override
Override
Output power keys select the power permanently.
•
MR/Code Display (PMR only)
MR/Code Display (PMR only)
MR/Code Display (PMR only)
MR/Code Display (PMR only)
Selects the indication text.
---- MR CH
MR CH
MR CH
MR CH
Operating channel's text.
---- MR CH + TX CODE CH
MR CH + TX CODE CH
MR CH + TX CODE CH
MR CH + TX CODE CH
Operating channel number and 10 letters of TX Code
channel's text (or 7 digits of code contents when text
is not programmed).
•
Beep
Beep
Beep
Beep
Confirmation beep tones generally sound when you
push a key or switch.
These can be turned ON or OFF to your preference.
You can program the repeater for silent operation or to
have confirmation beeps sound.