Icom IC-M700PRO Instruction Manual - Specifications and Options
8
SPECIFICATIONS AND OPTIONS
23
■
Specifications
GENERAL
• Frequency coverage
:
Receive
500 kHz–29.999 MHz
Transmit
1.6– 2.9999 MHz
4.0– 4.9999 MHz
6.0– 6.9999 MHz
8.0– 8.9000 MHz
12.0– 13.9999 MHz
16.0– 17.9999 MHz
18.0– 19.9999 MHz
22.0– 22.9999 MHz
25.0– 27.5000 MHz
• Mode
: USB, AM, CW, FSK and AFSK
(
available modes differ with the
version)
• Number of channels
: 150 channels (max.)
3 groups of 50 channels each
• Antenna impedance
: 50
ø
nominal
• Usable temp. range
: –30°C to +60°C
(–22°F to +140°F)
• Frequency stability
: ±10 Hz
(–30°C to +60°C; –22°F to +140°F)
( ±20 Hz above 15 MHz for Gen-
eral and Marine versions)
• Power supply requirement : 13.6 V DC±15%
( negative and floating grounds
available depending on the ver-
sion)
• Current drain
:
Transmit
(max. output power)
30 A
Receive
(max. audio output)
2.5 A
(negative ground)
• Dimensions
: 291.4(W)
×
116.4(H)
×
315(D) mm
(projections not included) 11.3(W)
×
4.4(H)
×
12.8(D) in
• Weight (approx.)
: 7.9 kg; 17.4 lb
TRANSMITTER
• Output power
: 150 W
pep
(60 W above 24 MHz)
• Spurious emissions
: –75 dB
typical
• Carrier suppression
: 65 dB
typical
• Unwanted sideband suppression : 70 dB
typical
• Microphone impedance
: 600
ø
RECEIVER
• Sensitivity
USB, CW, AFSK, FSK,
(for 12 dB SINAD)
:
0.35 µV
typical (1.8–29.9999 MHz)
1.0 µV
(1.6–1.7999 MHz)
6.3 µV
(0.5–1.5999 MHz)
AM
(for 10 dB S/N)
:
2.2 µV
typical (1.8–29.9999 MHz)
6.3 µV
(1.6–1.7999 MHz)
32 µV
(0.5–1.5999 MHz)
• Spurious response rejection
: 80 dB
typical
(1.6–29.9999 MHz)
• Audio output power
: 4.0 W
(at 10% distortion
with a 4
ø
load)
• Audio impedance
: 4
ø
(4 to 8
ø acceptable
)
• Clarity variable range
: ±150 Hz
■
Options
AT-130
automatic
antenna
tuner
MN-100
antenna
matcher
MN-100L
antenna
matcher
AH-710
folded
dipole
antenna
Matches the transceiver to a
long wire antenna with a mini-
mum of insertion loss.
Matches the transceiver to a
dipole antenna. Covers all HF
bands from 1.5 to 30 MHz.
8 m (26 ft.)
×
2 antenna wires
are included.
Matches the transceiver to a
long wire antenna. Covers all
HF bands from 1.5 to 30 MHz.
15 m (49 ft.)
×
1 antenna wire
are included.
Covers from 1.9 to 30 MHz
band. Has an SO-239 con-
nector. Easy to assemble
(non-kink construction).
OPC-566
control
cable
The optional control cable for
AT-130.
All stated specifications
are subject to change without no-
tice or obligation.
approx.
24.5 m;
80.3 ft
Approved Icom optional equipment is designed for optimal
performance when used with an Icom transceiver.
Icom is not responsible for the destruction or damage to an
Icom transceiver in the event the Icom transceiver is used
with equipment that is not manufactured or approved by
Icom.