Icom IC-M700PRO Instruction Manual - Panel Description
2
2
PANEL DESCRIPTION
■
Front panel
q
MICROPHONE CONNECTOR (p. 16)
Accepts the supplied microphone or an optional
handset.
☞
NOTE: No audio is output to the speaker when
the microphone or handset is not connected.
w
POWER SWITCH [POWER]
Turns power ON or OFF.
e
SPEAKER SWITCH [SPEAKER]
Turns the built-in speaker ON or OFF.
• “
è
” appears in the display while the speaker is turned
OFF.
• Any external speaker connected to the rear panel is not
turned OFF.
r
DISPLAY INTENSITY SWITCH [DIMMER]
Turns the display backlighting ON or OFF.
t
VOLUME CONTROL [VOLUME]
Adjusts the audio output level.
• No sound is output to the speaker when:
➥
A microphone is not connected.
➥
The [SQL] switch is turned ON and no signal is being
received.
y
GROUP CHANNEL SELECTOR [GROUP]
In the memory mode, selects 1 of 3 channel groups
(“A,” “B” or “C”). (p. 5)
• In the VFO mode, it has no function.
➥
Selects an item in the set mode. (p. 11)
u
ANTENNA TUNE SWITCH [TUNE] (p. 8)
Tunes the external tuner to the antenna.
• Activates only when an optional antenna tuner such as
Icom’s AT-130 is connected.
☞
NOTE: When selecting “automatic tuning” in the
set mode, pushing this switch is not necessary
to tune the antenna. (p. 11)
i
CHANNEL SELECTOR [CHANNEL] (p. 5)
➥
In the memory mode, selects an operating chan-
nel within the selected channel group.
• A maximum of 50 channels are available in each
channel group, depending on set mode setting (pgs.
13 and 14).
➥
In the VFO mode, changes the operating fre-
quency in 0.1 kHz steps.
• Frequencies selected in the VFO mode are tempo-
rary.
o
SCAN SWITCH [SCAN] (p. 6)
Push to toggle the scan ON or OFF.
!0
CLARITY CONTROL [CLARITY] (p. 9)
Shifts the receive frequency ±150 Hz for clear re-
ception of an off frequency signal.
MICROPHONE
POWER
VOLUME
TX FREQ
2182KHz
RESET
MODE
TUNE
SSB RADIO TELEPHONE
AGC
SQL
SCAN
CLARITY
N B
SPEAKER
[ALARM] [TX FREQ]
+
FOR ALARM TX
DIMMER
GROUP
CHANNEL
1
2
3
4
5
6
7
8
9
CL
T ONLY
ENT
0
CH/FREQ
iM 700PRO
TX
RX
DSC
F
ALM
q
w
e r
t
y
u
i
!0
o
This function is not installed
in the IC-M700PRO.